Brick Mould Seal™

Stacks Image 4929
Product Description
Stacks Image 4938
Brick Mould Energy Seal™ is a permanent gasket seal designed to eliminate air and moisture from entering between the brick mould and wall. Made from closed cell cross-linked polyethylene, Energy Plate Seal has the ability to compress and re-adjust for a permanent perfect fit during construction and when the building settles or moves. This peel and stick product uses Weather Bloc's high performance MicroGrab™ Adhesive Technology that allows adhesion in extreme cold and wet weather.
Basic Uses
This product can be used with any window or door that has brick moulding. Can also be used as a backer, expansion joint or energy gap filler that need to be sealed.
• Full Seal of Brick Moulding
• Less Expense than Caulking
• Stops Moisture and Air Infiltration at Joint
• No VOCs, Mold & Mildew resistant
• Adheres to damp, wet and cold surfaces
• Peel and Stick for Easy Install
• Fits Any Size Door or Window
• Comes in Roll Form for Easy Transport
• No Primer Required
• Widest Range of Installation Temperatures
• Compatible with All Building Materials
• Maintains a Permanent Seal
• Lifetime Limited Warranty
• 5 year Shelf Life
• Environmentally Friendly with NO VOCs
• Made in USA

Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.
Available Sizes


1.25" x 25'







Customizable Sizes Available

How Do I Flash Brick Mould?

Flashing a door or window long-term with brick mould can be next to impossible. Making them energy efficient can be even harder. Weather-Bloc has a solution for both flashing and saving energy all in one - Brick Mould Energy Seal™.

Most installations of brick moulding are done with just caulk. When caulk dries our or the building shifts, caulking losses it ability to stop moisture intrusion.
Seal Box Sill
Many times brick mould is being installed with stone or brick. The surface of the masonry wall is not level and caulking does not work long-term. Over time masonry walls lose its water proofing ability and water will enter the masonry and push the caulk loose.

Brick Mould Energy Seal will couture to the uneven surface and act as a waterproofing gasket. Even its the building shifts or moves or brick isn't waterproof, this product will stay sealed saving $1000s of dollars over the years.
Stacks Image 34227
Stacks Image 34224
Stacks Image 5180
Many engineers say that brick mould on doors and windows has its own microcosm as wood attached to masonry has issues. Moisture rots wood and masonry is very porous and tend to takes in moisture. When this happens, the freeze and thaw cycles tend to push off products the are not engineered to adhere.
Stacks Image 21856
One key is to keep the masonry sealed. Weather-Bloc has several products to help accomplish including DriMax.

Sealants fail because adhering to an uneven surface can be difficult. The sealant is thin in some spots and thicker in others. Uneven sealant tensile stress causes many sealant to pull away and open up allowing air and moisture to enter. Many caulks have good elongation properties but not high-strength and will not work well in this environment. Building Consults will tell you that "the use of caulk in this area has a low probability of long-term success."

Weather-Bloc has developed a long-term solution to the brick mould joint waterproofing dilemma. The solution is a Brick Mould Energy Seal™ which is a gasket system where the material has the ability to form fit, yet is able to shrink or rebound without crushing during expansion and contraction cycles. It also has the able to permanently bond to the brick mould.

Brick Mould Energy Seal comes in roll form with Micro-Grab Adhesive peel and stick.
Energy Triple Seal seal is better than Protecto Energy Sill Sealer or Triple Guard Energy Sill Sealer. Seals off three adhesive membrane areas and stops infiltration from framing and foundation, sill plate, mud sill and other interfaces. The only true self-adhesive air and moisture sill barrier with a cross-linked gasket.