All Products

Add-A-Flange

“Adds a Nailing Flange to Any Door or Window”

Stacks Image 545250
$64.96

Comes in Roll Form
Self-adhering for Precise Placement
Helps Maintain a Permanent Seal
Add a Flange to Any Window or Door

More Details..
Doors and windows without flanges or nail fins can cause problems for flashing the window properly. Many installation are done very poorly when they
Add Nailing Fin to Window or Door
Adhesive that works in wet conditions
Adhesive works in low temperatures
Peel and Stick
Energy Efficient products
Green Building Products
Micro-Grab adhesive technology
Long shelf life
Adhesive stays flexible
Learn Science behind building products
No drool product
Made in the USA
Problems with house wrap
This system works on any door or window that does not have a nailing flange. It could also work on any opening that needs a flange flashing that is covered.
Add-a-Flange™ is a peel and stick flange that offers a permanent seal for windows or doors by adding or replacing a nailing flange. This product is a Flange and flashing tape all in one. Composed of hi-density ridged polyethylene polymers, each sheet can be quickly installed due to a series of live, hinges that can conformed to almost any size or shape window and/or door profile. 

Combined with peel and stick MicroGrab™ Adhesive Technology, this high performance membrane will adhere in extreme cold and wet weather and create a long last air and moisture barrier.
Features of adding a fine to window
Doors leak without fins or flanges
North America Best Performance Products

Brick Mould Seal

“Great Way to Seal Brick Moulding”

Stacks Image 546053
$25.94

Peel and Stick
Easy Install No Mess
Conforms to Irregular Surfaces
Seal Full 1.25” Width of Brick Mould

More Details..

BramGuard Thru-Wall Flashing

“No Droll, All Weather Tape”

Stacks Image 546497
$44.97

100% Air and Moisture Barrier
Twice as Strong as Other Tapes
Peel and Stick Application
No Drooling or Staining

More Details..
Stacks Image 33273

Through Wall Flashing

Stacks Image 4929
Product Description
Stacks Image 4938
WaterStop™ Through Wall Flashing is a extremely durable peel and stick membrane that aggressively bonds to wood, concrete or block in harsh weather conditions. Designed to be 100% waterproof and creates an impervious barrier for water to exit to the face of the exterior finish. This easy to form membrane works well with cants, bump-outs or other features. Manufactured with MicroGrab™ Adhesive Technology this tape can can withstand the expansion and contraction of manor walls.
Stacks Image 4177
Stacks Image 4174
Basic Uses
This waterproof peel and stick flashing tape can be used for masonry through wall flashing or where non-exposed waterproofing is needed.

Diverts Moisture from Masonry Walls

Stacks Image 32043
Through-wall flashing is used to divert moisture, which has entered the wall, to the outside, before it can cause damage. This flashing method is considered the most effective method of preventing leaks.
Features
  • For Residential or Commercial Use
  • Peel and Stick
  • 100% Air and Moisture Barrier
  • Twice as Strong as Other Tapes
  • Seals around nails
  • Adheres at - 30º F
  • Stays Elastic, Does Not Oxidize or Dry Out
  • No Drool or Staining
  • Widest Range of Installation Temperatures
  • Available in 3 Widths
  • Workable for Precise Placement
  • Thin Design for Better Formability
  • No Heated Storage Required
  • Conforms to Surfaces Irregularities
  • Compatible with Most Building Materials
  • Helps Stop Mold and Mildew
  • No VOCs and Environmentally Friendly
  • Micro-Grab Adhesive Technology
  • 5 year Shelf Life
  • Limited Lifetime Warranty
  • Made in USA
Available Sizes

Sizes

12" x 75'

18" x 75'

24" x 75'

Rolls/Case

4

4

4

Lbs./Case

26

35

52

Cases/Pallet

48

24

24

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

Chalk-Loc Concrete Sealant

“The Mini Size in Waterproofing Protection”

Stacks Image 543258
Stacks Image 543262
$199.99

Stops Concrete From Chalking
Fast Dry Time, One Coat
Non-Toxic and Odorless
Preps Concrete for Latex Paints

More Details..

Crack Control Tape

“Heavy Duty EIFS Stucco Tape”

Stacks Image 546399
$30.97

Excellant Bonding Poly-Fiber Surface
Anti-Fracture Design
Superior Strength and Performance
Compatible With Most Insulations

More Details..

Counter Flashing Guard

“Stops Water at the Top of Windows”

Stacks Image 542103
$39.95

Comes in Roll Form
Self-adhering for Precise Placement
Helps Maintain a Permanent Seal
Top of the Window Water Protection

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Counter Flash Guard™ is self-adhering adjustable counter flashing. Composed of hi-density ridged polyethylene polymers, each flashing sheet can be quickly installed due to a series of live, hinges that can conformed to almost any size or shape window and/or door profile.


Combined with peel and stick MicroGrab™ Adhesive Technology, this high performance membrane will adhere
in extreme cold and wet weather and create a long last air and moisture barrier.


Stacks Image 4177
Stacks Image 4174
Basic Uses
Anywhere unexposed counter flashing is needed to protect a opening or penetration.

How to Stop Window and Door Leaks

The proper use and correct installation of flashings in building structure may be the most important element in having a successful building project. Flashing are a construction component used to seal and protect penetrations or openings in a building’s protective envelope from water intrusion. Water is the one element that poses the greatest threat to a building. Billions of dollar are spent every year on repair and lawsuits due to water infiltrating a building.

After roofing leaks, window and door account for the majority of leaks. Proper sealing and flashing the top of the window is perhaps the most critical. Many window manufactures have predesigned flashings, flanges and drip caps. Weather-Bloc Systems developed the Counter Flash guard for window and doors that need a proper flashing system. Easy to install and designed
to resist the three mechanisms of water penetration: gravity, surface tension, and wind pressure.
Stacks Image 32043
Counter Flash Guard can be used on other non-exposed area of a building to keep out water. The flexible material is easy to work with in roll form and allows for the bottom to float giving it a true advantage in many construction details.




Features
  • In Roll Form for Fast, Easy Installation.
  • Super Aggressive Adhesive on the Leading Edge
  • Self-adhering, Peel and Stick
  • Easy Start™ Edge For Fast Installation
  • Conforms to Surfaces Irregularities
  • No Drool or Staining
  • Workable for Precise Placement
  • Thin Design for Better Formability
  • Helps Stop Mold and Mildew
  • No Heated Storage Required
  • No VOCs and Environmentally Friendly
  • Micro-Grab Adhesive Technology
  • 5 year Shelf Life
  • Limited Lifetime Warranty
  • Made in USA
Available Sizes

Sizes

4.5" x 25'

4.5" x 100'

Rolls/Case

4

2

Lbs./Case

5

40

Cases/Pallet

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

Deck Ledger Flashing

“Helps Stop Structural Rot and Mold”

Stacks Image 543367
Stacks Image 543371
$14.99

Great for Repairs or Coating
Superior Flexibility to Expand and Contract
Durability and Greater Waterproofing Protection

More Details..
Stacks Image 696720
Stacks Image 696629
Product Description
Stacks Image 696637
Deck Ledger Flashing is a self-adhering counter flashing for the deck ledger board. This flashing tape waterproofs the transition between the house and the deck. This high performance membrane is super strong, yet flexible to be able to contour to any joint. Fast to install due to being a peel and stick with MicroGrab™ Adhesive Technology that will adhere in extreme cold and wet weather and create a long lasting air and moisture barrier. This product stops water damage in an area that is highly susceptible to water intrusion.

Stacks Image 696644
Stacks Image 696641
Basic Uses
This counter flashing can be used on any ledger board (roof, floor or decks) were waterproofing is a necessity.

How to STOP deck ledger rot - Permanently!

Stacks Image 696661
Home owners don't want to step down 8" - 10" unto their deck. So most of today's deck are designed with the threshold at the same height as the deck. In this situation, deck ledger flashing is becoming even more important. Decks that are improperly flashed can cause serious safety issues such as structural movement or risk of imminent collapse. Poor flashing can also cause water to migrate into the wall and invite carpenter ants or termites, not to mention mold.

Using Weather-Bloc's Deck Ledger Flashing can stop deck ledger rot permanently by keeping it 100% watertight. Proper flashing of this area will increase the length of service on the deck as it will remain more structurally secure at this connection.

The key to keeping this flashing area waterproof is the ability of our Deck Ledger Flashing Tape to fully adhere to the substrate, giving it a 100% watertight seal. This is due to our Micro-Grab Adhesive Technolgy. By having that complete bond, it assures the homeowner that this flashing will perform properly and be effective as a long-term solution.
Stacks Image 696666

A deck ledger board can act like a horizontal dam interrupting drainage and potentially directing water to fastener penetrations and into the wall. Careful detailing of this connection and the correct flashing material is necessary for both the integrity of the building’s drainage system and for the durability of the deck structure.

The diagram above illustrates how most deck ledgers are detailed and why they fail. They rely on two assumption that are incorrect. One, that caulk behind the flashing will stay waterproof. Two, that water will never get behind the drainage plane.

Caulk should never be relied on as a long-term waterproofing solution. Weatherization research shows that caulk varies in life expectance from 6 months to 10 years depending on the quality of the caulk and application. This ledger detail will be expected to last much longer than six months.

The drainage plane is designed and constructed to drain water to the exterior of the building using water repellent materials such as building paper, house wrap, foam insulation, etc. They are interconnected with flashings, window and door openings, and other penetrations of the building enclosure to provide drainage of water. It is these interconnected areas that cause great concern as water can get behind the drainage plane. In this case, the water could now drain into the ledger flashing area and enter at any weak caulking spots.

Using Weather-Blocs Deck Ledger Flashing will stop moisture from entering even if caulk fails and even if water get behind the drainage plane. Due to the Micro-Grab Adhesive Technology, the flashing forms a permanent bond to the substrate keeping air and moisture from infiltrating into the ledger flashing area. Go with the permanent superior sealing solution - Weather-Bloc.





Features
  • No Primer Required
  • Will Not Damage Wood or Siding
  • Fits Any Size Ledger System
  • Watertight and Puncture Resistant
  • Expands and Contracts without Tearing
  • Peel and Stick Installation
  • Installs in Less than 5 Minutes
  • Maintains a Permanent Seal
  • Corrosion Resistant
  • Widest Range of Installation Temperatures
  • Workable for Precise Placement
  • Compatible with All Building Materials
  • Super Aggressive Adhesive on the Leading Edge
  • Self-adhering, Peel and Stick
  • Easy Start™ Edge For Fast Installation
  • Conforms to Surfaces Irregularities
  • No Drool or Staining
  • Workable for Precise Placement
  • Thin Design for Better Formability
  • Helps Stop Mold and Mildew
  • No Heated Storage Required
  • No VOCs and Environmentally Friendly
  • Micro-Grab Adhesive Technology
  • 5 year Shelf Life
  • Limited Lifetime Warranty
  • Made in USA
Available Sizes

Sizes

8.5” x 25'

8.5” x 100'

Rolls/Case

12

8

Lbs./Case

12

23

Cases/Pallet

48

48

Customizable Sizes Available

DucTite HVAC Tape

“Great for Ducts”

Stacks Image 542965
$10.97

Excellant Adhesion
Easy to Install
Works Indoors and Outdoors
Heat Resistant

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
DuctTite™ Metalized Duct Tape is an easy to install duct tape that seals metal joints. This tape offers excellent adhesion and is heat resistant. Can be used indoor or outdoors.
Basic Uses
This tape can be used to seal duct board, flex duct or sheet metal. Great sealing tape for many high heat applications.

Not Just Duct Tape

Most HVACR contractors spend the bulk of their time focused on the flexible sheeting, support braces, connectors, and airflow - and not necessarily on a less costly tool that can pay big performance dividends: duct tape.
Stacks Image 34260
Most of todays HVAC tapes used on duct work are high heat tapes. Most all of these tapes fall short in regards to long-term adhesion performance. This is due to the adhesives (mainly asphalt based) drying out and losing their ability to adhere. Once this happens, they are no long an air barrier and conditioned air is lost. In turn, this causes increased energy costs.

Weather Bloc's DuctTite™HVAC Foil Flashing Tape uses Micro-Grab technology, which insures our adhesive adheres to the ducts. With its re-enforced metalized film, DuctTite has the ability to dissipate heat and not transferring through conduction to the surrounding air. This "flashing tapes" is designed to be strong, yet extremely flexible giving it the ability to contour to the many difficult assembly profiles. Get Energy Smart and start using DuctTite.
Features
• For Residential or Commercial Use
• 730 Day UV Exposure Rating
• Metalized Film Dissipates Heat
• No Primer Required
• Self-adhering, Peel and Stick
• Easy Start™ Edge For Fast Installation
• Air and Moisture Barrier
• Helps Stop Energy Loss
• Twice as Strong as Other Tapes
• Seals around Fastners
• Stays Elastic, Does Not Oxidize or Dry Out
• Conforms to Surfaces Irregularities
• No Drool or Staining
• No Heated Storage Required
• Workable for Precise Placement
• Thin Design for Better Formability
• Compatible with All Building Materials*
• No VOCs and Environmentally Friendly
• Micro-Grab Adhesive Technology
• 5 year Shelf Life
• Limited Lifetime Warranty
• Made in USA
Available Sizes

Sizes

4" x 75'

6" x 75'

Rolls/Case

12

8

Lbs./Case

14

27

Cases/Pallet

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

DriMax Sealer

“Great for Cementitous Products”

Stacks Image 543315
Stacks Image 543319
$49.95

Dries Transparent and Can Be Painted
Excellent Coverage and Fast Curing
Excellent Protection From Wind Driven Rain

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
DriMax™ is a special formulated clear water base sealer designed to offer long-term waterproofing protection. DRIMAX is a silicone/silane transparent waterproofing sealer and provides superior protection from wind driven rain on almost all porous masonry surfaces.

DriMax is fast drying, leaves no tacky finish, provides a low cost application and produces a water repellent surface without staining or significantly changing the color of the concrete or masonry surface. It requires no special tools to apply, can be sprayed, rolled or brushed on.
Basic Uses
Seals masonry and offers excellent protection to concrete, stone, brick, block, stucco, terra cotta and terrazzo.
Stacks Image 33636
Features
• Seals and Protects Masonry
• Dries Transparent and Can be Painted
• Excellent Coverage and Fast curing
• Leaves NO Tacky Surface
• Only Requires one Application
• Designed for all Masonry surfaces
• Performs in Extreme Weather Conditions
• Gives Excellent Protection from Wind Driven Rain

Coverage
200 square feet per gallon.
Available Sizes

Sizes

1 Gal

Units/Case

1

Lbs./Case

10

Cases/Pallet

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

DurX Deck Trim

"Composite Trim That Lasts a Lifetime"

Stacks Image 543423
Stacks Image 543427
$39.99

Waterproof and Will Not Rot
UV Resistant, Customizable Skirting
Help Keep Out Rodents and Other Pests

More Details..
Stacks Image 4927

Composite Deck Trim

Stacks Image 4929
Product Description
Stacks Image 4938
DurX™ Deck Trim is made from a waterproof, UV resistant composite sheeting. This product is extremely durable and corrosion, rot resistant yet extremely lightweight. Durx is fast to install, can be nailed or screwed and easy to cut.
Basic Uses
This material can used around decks for trim or panels. Other uses can be anywhere that a panels is need to trim out or finish a wall or opening or even to protect insulation.
Stacks Image 33636
Features
• Super Strong Composite Material
• Waterproof and Mold Resistant
• Will Not Rot, Rust or Corrode
• Impact Resistant
• Compatible with All Building Materials
• Interior or Exterior Use
• Maintenance Free for Longer Life



Coverage
Max size is 4' x 8' Sheets
Available Sizes

Sizes

4' x 4'

4' x 8'

Panels/Case

4

4

Lbs./Case

20

40

Cases/Pallet

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

Energy Plate Sealer

“Avoid Trapped Moisture Under Wall Plates”

Stacks Image 544750
$34.97

Seal Entire Plate, More Effective Than Caulk
Reduces Energy Costs
Conforms To Irregular Wood

More Details..

ElastoPreme Window/Door Caulk

“Great for Back Caulking Windows/Doors ”

Stacks Image 543556
$8.95

Works Great For Windows and Door s
Will Not Crack or Yellow
Resists Dirt and Dust, Paintable
Odor Free with No VOCs

More Details..

Energy Sill Sealer

“Designed to be the Best Sill Sealer”

Stacks Image 543695
$39.97

Weather Stripping Gasket
Cross-Linked foam With Rebound Memory
Provides a Thermal Break
Peel and Stick For Fast Installation

More Details..

Energy Triple Seal

“Seals #1 Area for Energy Loss”

Stacks Image 546107
$54.97

1 Kit contains:
25’ of Energy Sill Gasket &
25’ of 6” Max Shield Tape

Blocks Air/Moisture Infiltration At Joint
Reduces Heating and Cooling Costs

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Triple Seal Energy Sill Sealeris the combination of the gasket seal of ENERGY SILL SEAL and the air & moisture barrier protection of MAX-SHIELD. This unification of products gives you the ultimate protection from air & moisture infiltration that can deplete your building of up to 40% of its energy efficiency. 3X sealing provides three adhesive membrane areas for maximum protection.
Energy Sill Seal is a permanent gasket seal designed to eliminate air and moisture from entering between the foundation and the floor deck. Made from closed cell cross-linked polyethylene, Energy Sill Seal has the ability to compress and re-adjust for a permanent perfect fit during construction and when the building settles or moves.

Max-Shield™Perimeter Sill Flashing is made with an extremely durable puncture resistant facer that has over 500% elongation. It offers 100% protection from both air & moisture infiltration and has the ability to expand and contract with extreme substrate movement assuring a permanent long term water tight seal.
Basic Uses
Designed to seal up the most crucial area in a building, the interface between a floor deck/mud sill and top of the foundation.
Features
• Full plate seal, not just internal edge
• Stops moisture and air infiltration at joint
• Separates and provides a thermal break
• Adheres to damp, wet and cold surfaces
• Peel and stick for easy install
• Maintains a permanent seal
• Crossed Linked for Anti-Crush Properties
• Reduces Heating and Cool Costs
• Prevents harmful Garage Fumes from Entering
• Exceeds Local and National Codes
• Help Stop Mold and Mildew
• No Primer Required
• Widest Range of Installation Temperatures
• Workable for Precise Placement
• Compatible with All Building Materials
• Prevents Air and Moisture Infiltration
• Strongest Tape on the Market
• Moves With Joint Expansion and Contraction
• Conforms to Surfaces Irregularities
• Stays Flexible Forever
• Peel and Stick Installation
• Stops Energy Loss
• Stops Bugs from Entering at Joint
Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.
Available Sizes

Sizes

75 Lin. Ft.

Kits/Case

6

Lbs./Case

28

Cases/Pallet

48

Customizable Sizes Available

Box Sill Energy Loss at the Plate Line

Considered the most crucial area to seal up in a building is the interface between a floor deck/mud sill and top of the foundation - the box sill area. Test studies through the United States Department of Energy at Oakridge Laboratories have shown that a building can lose up to 40% of its total energy efficiency through air leakage if not properly sealed.
Seal Box Sill
The photo above using scientific instrumentation energy loss at the box sill area. The dark orange color represents the highest loss. Reducing the amount of air that leaks in and out of the box sill area is a cost-effective way to cut heating and cooling costs, improve durability, increase comfort, and create a healthier indoor environment. No other product maximizes a buildings energy efficiency more cost effectively than Triple Seal Energy Sill Sealer™ by Weather-Bloc.
Stacks Image 5136
Stacks Image 5174
Stacks Image 5180
Building air leakage is known as infiltration, which is introduction of outside air into a building, via gaps, cracks, door, windows or other unplanned openings. Whenever there is infiltration, there is corresponding exfiltration elsewhere in the building. In winter, air infiltration can result in warm, moist indoor air moving into cold envelope cavities.Air infiltration can cause condensation to occur in the structure, resulting in mold, decay and rot. Infiltration is usually caused by wind, "the stack effect", and/or mechanical equipment in the structure.
Stacks Image 5186
Wind creates a positive pressure on the windward face. On the opposite side of the building, negative pressure is created which pulls the air out of the building. Wind causes infiltration on one side of a building and exfiltration on the other.
The “stack effect” is when warm air moves upward in a building. This happens in summer and winter, but is most pronounced in the winter because indoor-outdoor temperature differences are the greatest. Warm air rises because it’s lighter than cold air. So when indoor air is warmer than the outdoor air, it escapes out of the upper levels of the building, through open windows, ventilation openings, or penetrations and cracks in the building envelope. The rising warm air reduces the pressure in the base of the building, forcing cold air to infiltrate through open doors, windows, or other openings. The stack effect basically causes air infiltration on the lower portion of a building and exfiltration on the upper part.

Mechanical equipment such as fans and blowers causes the movement of air within buildings and through enclosures, which can generate pressure differences. If more air is exhausted from a building than is supplied, a net negative pressure is generated, which can induce unwanted airflow through the building envelope. Bathroom exhaust fans, clothes dryers, built-in vacuum cleaners, dust collection systems, and range hoods all exhaust air from a building. This creates a negative pressure inside the building. If the enclosure is airtight or the exhaust flow rate high, large negative pressures can be generated.

Plugging crack or opening in a building is critical to a building performance in regards to energy usage and long-term durability. Creating a better balanced building envelope systems can play a important roll in health and safety of its occupants. Reduction in air infiltration can reduce harmful mold, have fewer drafts and can create better performance from ventilation systems.

Weather-Bloc's Triple Seal Energy Sill Sealer is the world's most advanced solution to the "box sill/ plate line" dilemma. Almost 100% of all buildings being built today use a non-crossed linked foam as a sill sealer. This type of foam was never designed as a gasket and can not seal long-term. Non-Crossed linked foams collapse once weight is applied on it, similar to bubble wrap. When the building dries out and the lumber framing and concrete foundation shrinks, large voids are left behind for both air and moisture to infiltrate.

Stacks Image 5787
Weather-Bloc Systems is the first company that offers a gasket sill sealer and for added protection from abnormal shrinkage and voids we developed Max-Shield a peel & stick perimeter sill flashing that gets applied once the floor deck is in place to assure a precise location and accurate installation. This winning combination has been shown to reduce Utility costs by over 35%.
Energy Triple Seal seal is better than Protecto Energy Sill Sealer or Triple Guard Energy Sill Sealer. Seals off three adhesive membrane areas and stops infiltration from framing and foundation, sill plate, mud sill and other interfaces. The only true self-adhesive air and moisture sill barrier with a cross-linked gasket.

Energy Slab Seal

“Must Have for Slab Construction”

Stacks Image 543755
$37.97

Seals Even Uneven Concrete
Provides a Effective Thermal Break
Anti-Crush, Cross Linked Foam

More Details..

FiberSeal Tape

“Residential EIFS Stucco Tape”

Stacks Image 546356
$21.97

Light Weight Tape
Great Surface Bonding
Wide Range of Install Temperatures
Great for Residential Construction

More Details..

FRP Joint Tape

“FRP Seam Tape”

Stacks Image 543005
$16.97

Adheres to FRP Sheets
Easy to Install
Anti-Fracture Seams
Paintable

More Details..

FRP Tape

Stacks Image 4929
Product Description
Stacks Image 4938
Weather-Bloc FRP Tape is a peel and stick product that allows for joint movement but will not split or tear. This clear tape can be coated or painted to match. FRP Tape is made from recycled content which makes a very environmentally friendly product.

This tape comes with Micro-Grab Adhesive Technology and is a air and moisture barrier to the joint. This tape is flexible and be used in corners as well.
Stacks Image 4177
Stacks Image 4174
Basic Uses
This waterproof tape can be used on joints for FRP sheets or FRP wall panels. Works great with InsulGuard Insulation Protection.

Seal the Joint Completely

Stacks Image 32043
The advantage of FRP Joint Tape over "H Clips" or "Bar Dividers" is its ability to seal the joint completely from air and moisture infiltration. The FRP Tape can also be coated to keep dirt and grim out of joint making it more sanitary. The FRP Tape can be painted or coated to give it the ability to be USDA & FDA approved.
Features
  • For Residential or Commercial Use
  • No Primer Required
  • Self-adhering, Peel and Stick
  • Air and Moisture Barrier
  • Helps Stop Energy Loss
  • Seals around nails
  • Stays Elastic, Does Not Oxidize or Dry Out
  • Conforms to Surfaces Irregularities
  • No Drool or Staining
  • No Heated Storage Required
  • Helps Stop Mold and Mildew
  • No VOCs and Environmentally Friendly
  • Micro-Grab Adhesive Technology
  • 5 year Shelf Life
  • Limited Lifetime Warranty
  • Made in USA
Available Sizes

Sizes

2.5" x 75'

5" x 75'

Rolls/Case

12

8

Lbs./Case

24

26

Cases/Pallet

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

Frame Guard

“Perfect Frame Protection for Doors”

Stacks Image 546196
$12.97

Protects Door Frames From Mortar
Separates Unlike Building Materials
Insulates Around Frame
Can Be Caulked

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Frame Guard™ is a protective gasket seal designed to separate window or door frames from incompatible materials. Frame Guard helps prevent damage to any claded window or door from corrosion and decolorizing from Stucco, Mortar, Cement and Acid based chemicals. This extremely cost effective product is made from closed cell cross-linked polyethylene and uses Weather Bloc's peel and stick MicroGrabTM Adhesive Technology that allows adhesion in extreme cold and wet weather.
Basic Uses
Works to protect the frame of doors or window. Anywhere a Thermal break or separation is needed.
Features
Stop corrosion to the frame
Separates acids-based products from cladding
Helps prevent staining and oxidation
Creates a seal around frame
Adheres to damp, wet and cold surfaces
Peel and stick for easy install
• Separates and provides a thermal break
• Maintains a permanent seal
• Crossed Linked for Anti-Crush Properties
• Use as Backer Rod to Caulk
• No Primer Required
• Widest Range of Installation Temperatures
• Workable for Precise Placement
• Moves With Joint Expansion and Contraction
• Conforms to Surfaces Irregularities
• Stays Flexible Forever
• Peel and Stick Installation
• Stops Energy Loss
• Stops Bugs from Entering at Joint
• 5 year Shelf Life
• Environmentally Friendly with NO VOCs
• Made in USA
Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.

Protect and Separate Door Frames

Architectural aluminum is widely used for window and door frames because it is attractive, durable, and requires little maintenance. However, unprotected aluminum interacts with cement-based materials, resulting in severe frame damage. IT is important to protect Metal window and door frames and Frame Guard is one way to help.
Seal Box Sill
Stacks Image 34227
Stacks Image 34224
Stacks Image 5180
Damage to Window and Door frames often occur during the handling and installation. When masonry products, such as concrete, mortar or plaster come in contact with the metal frame due to run-down, splattering or splashing, serious corrosion problems can occur to the frames. Even after the units are installed, construction like brickwork or roofing can cause additional problems if the units are left unprotected. Even masonry dust can be a real challenge and should be removed immediately. Protecting the frames from these various elements may include plastic sheets, silicone and lubricant sprays and plastic tape (Kling-Tite) to cover items such as door and window frames and sills.
Stacks Image 34232
Metal frames are generally corrosion resistant if anodized and properly sealed or painted with baked-on fluoropolymer paint but they are often subject to deterioration of the coating and corrosion of aluminum in severe (industrial, coastal) environments and galvanic corrosion from contact with dissimilar metals. Frame corner seals constructed using sealant are prone to disconnect from prolonged contact with moisture and from thermal and structural movements.
Another element of frames to be aware of is dissimilar metal corrosion. Dissimilar metal corrosion is an electrochemical process that destroys metal, reducing its thickness and strength. This corrosive reaction happens when these dissimilar materials are brought together in the presence of a catalyst. Dissimilar metals such as steel and aluminum are most prone to corrosion, in fact steel and aluminum react or corrode when they come in contact with each other. A great tip is to never use steel fasteners in aluminum framed doors or windows.
Available Sizes

Sizes

3/4" x 25'

Rolls/Case

4

Lbs./Case

1

Cases/Pallet

48

Customizable Sizes Available

Energy Triple Seal seal is better than Protecto Energy Sill Sealer or Triple Guard Energy Sill Sealer. Seals off three adhesive membrane areas and stops infiltration from framing and foundation, sill plate, mud sill and other interfaces. The only true self-adhesive air and moisture sill barrier with a cross-linked gasket.

Insul-Guard Foundation Composite

"Protect and Dress Up Your Foundation Insulation"

Stacks Image 544832
Stacks Image 544835
$82.25
Concrete Gray Color

WaterProof and UV Resistant
Super Durable Composite Material
Impact Resistant
Non-Corrosive, Non-Conductive

More Details..
Stacks Image 27666
Foundation Insulation Protection System
Stacks Image 27102

Insul-Guard

Designed to give protection and finish the top of the exposed foundation insulation.

Stacks Image 28681

Roll Size Availability
12” Wide x 50’ Long
16” Wide x 50’ Long
24” Wide x 50’ Long

Other Sizes Availability
4’ x 8’

Stacks Image 28698
Protection Your Foundation
High Impact Resistant
Protection:
Back Filling
Bugs and Pests
Weed trimmers and mower debris
100% Waterproof
Prevents:
Mold or mildew
Structural framing damage
Sill plate leakage

Enhance Curb Appeal
Promotes:
Clean look
Professional finish
Value

Insul-Guard System Advantages

  • default_titleImpact Resistant
  • default_title100% Waterproof
  • default_titleMold Resistant
  • default_titleUV Protection
  • default_titleSimple Installation
  • default_titleEasy to Clean
  • Show More
  • default_titleWill Not Buckle
  • default_titleWill Not Ripple
  • default_titleNon-Conductive
  • default_titleNo VOCs
  • default_titleMade in USA
  • default_titleLifetime Limited Warranty
  • Show More
  • default_titleHelps Prevent Pests
  • default_titleReduces Utility Costs
  • default_titleThickness Adjustability
  • default_titleEast to Cut
  • default_titleLightweight for Transport
  • default_titleWill Not Corrode
  • Show More

What makes Insul-Guard a great solution

  • Insul-Guard Is a cost effective way to protect foundation insulation above grade. It can also be used for waterproofing foundations above grade or just be used for enhancing the plain, unattractive look of concrete. It is ideal for protecting ICF’s because of it’s strength and durability.
  • Insul-Guard is made up of a lightweight, durable 100% waterproof, mold & mildew resistant composite that can withstand extreme blunt force from backfills and every day use of lawn equipment.
  • Insul-Guard can be mechanically attached or you can use our commercial grade double-back tape. The tape has no harmful V.O.C. so it will not harm the foam. It can be applied to wet surfaces and –40° F temperatures so there are no delays because of inclement weather.
  • Insul-Guard can be cut with a shears/snips so no special tools are needed. It saves money and a ton of labor because it can be installed in 75% less time than spray on coatings. It is also approx. 100x stronger than spray on coatings.
Stacks Image 57244

Night and Day Difference

Competition
Cheap Plastic

Many of the old systems used cheap plastic which could not stand up to the rigors of a structures foundation. They could not hold up and:
- cracked
- buckled
- rippled
- oil canned

Insul-Guard
Space Age Composite

Insul-Guard has been designed and formulated with a composite material that has been proven to protect foundation insulation as well as provide a waterproofing system. The advantage of Insul-Guard is
- high impact resistance
- won’t buckled or oil can
- waterproof
- uv resistant

“They may look similar … but there is a Night and Day difference.”

Insul-Shield Flashing

“Waterproofs the Top Edge”

Stacks Image 545116
Stacks Image 545119
$15.99
Concrete Gray Color

Protects Top Edge From Infiltration
Very Aggressive Bonding Adhesive
Peel & Stick

More Details..

Insul-Shield

Stacks Image 28517

Roll Size Availability
3” Wide x 75’ Long
6” Wide x 75’ Long

Stacks Image 29181

Air & Moisture Barrier Tape

Reduces Energy Costs
Stops air flow
Protect foam R-value
Blocks water flow
Cold or Wet Adhesion
No weather delays
Real world conditions
No VOCs
Super Strong
25 X stronger
Permanent Bond
Punctured Resistant

Insul-Flash

“Adjustable Z-Flashing”

Stacks Image 545065
Stacks Image 545068
$44.99
Concrete Gray Color

Accommodates Variable Thickness of Insulation
Comes in Roll Form
Adhesive Peel & Stick Overlap

More Details..

Insul-Flash

Stacks Image 29328

Roll Size Availability
25’ Long
100’ Long

Pre-Grooved Adjustment
Insulation thickness 1” - 3”
(Larger sizes available)

Stacks Image 29332

Top of Insulation
Transition

Diverts Waterflow
Protection insulation
Prevents will plate leakage
Adjustable To 3” insulation
Pre-grooved for easy bending
Every 1/2” starting at 1” - 3”
Adjustable top for sloped or flat insulation

Peel & Stick Adhesive Down-Flap
Seal of top of Insul-Guard
Blocks air and moisture infiltration
Acts as a counter flashing

GripTite Ice and Water Seal

"Ultimate Roofing Ice and Water Seal"

Stacks Image 543899
Stacks Image 543903
Call for Pricing

Anti-Skid Synthetic Reinforced Membrane
Watertight and Puncture Resistant
Sticks and Seals in Cold and Wet Weather

More Details..
Stacks Image 696845
Stacks Image 696629
Product Description
Stacks Image 696637
GripTite™ Ice and Water Seal is an anti-skid cross laminated re-enforced roofing membrane. GripTite provides an additional layer of waterproofing protection to vulnerable roof areas. Combined with peel and stick MicroGrab™Adhesive Technology, this high performance membrane will adhere in extreme cold and wet weather. Ice damming and windblown rain can not penetrate the adhesion to the roof deck. This high performance product will self-seal when nails are driven through the membrane.

Basic Uses
Use in valleys, eaves, hips, rakes, ridges walls and even skylights. Can be used on new or existing decks.
Features
  • Contours Better Providing Better Adhesion
  • Will Not Fracture in Cold Weather
  • Lighter Weight and Easier to Carry
  • Peel and Stick Installation
  • Split-Back Release Liner
  • Widest Range of Installation Temperatures
  • Maintains a Permanent Seal
  • Seals Around Nails Like a Gasket
  • Textured Surface for Better Grip
  • Great Against High Winds
  • 100 % Air and Moisture Block
  • Works Well on All Roof Pitches
  • Can Be Applied on Damp Deck
  • Compatible with All Building Materials
  • Limited Lifetime Warranty
  • Made in USA
Available Sizes

Sizes

Rolls/Case

Lbs./Case

Cases/Pallet

Truck Load Quantity Min.

Customizable Sizes Available

Joist Protector for Decks

"Protect and Extend Deck Life"

Stacks Image 544662
Stacks Image 544666
$21.95

Permanent Protection for Top of Wood Joists
Extends the Life of Your Deck
Helps Reduce Plank Cupping

Joint Loc Sealant

"Seals Joints Up To 1" Wide"

Stacks Image 543958
Stacks Image 543962
$8.99

Superior Adhesion and Stays Flexible
Bonds in Wet and Cold Conditions
Water-Based Paintable
USDA and FDA Approved

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
JointLoc™ uses an advanced formula of superior polymer technology. This industrial strength sealant provides superior adhesion even in wet and freezing conditions. Pro-Formula was specially formulated to bond without a primer to most construction materials including fiber-cement, EPS, wood, metal, vinyl, concrete, aluminum and brick. This permanent sealant remains flexible and blocks out moisture and air infiltration. Guaranteed to never crack, peel or separate, JointLoc outperforms polyurethanes, silicones, tripolymers and other sealants.
Basic Uses
Can be used on projections, pipes, vents, termination bars, field seams, butt joints, fish mouths, pitch pans, soil stacks and wall joints.
Stacks Image 33636
Features
• Bonds in Wet, Freezing Temperatures
• Superior Adhesion
• Water-based for Easy Clean Up
• Fills Gaps up to 1" Wide
• Paintable
• Compatible with EPS/XPS Foam
• Odor free with VOC Compliant
• 98% Solids
• USDA and FDA approved
• No Primer Required
• Interior or Exterior Use
• Lifetime Seal
• Made in the USA

Coverage
A 10 fl oz cartridge will extrude approx. 30.6 ft of a 1/4” (6 mm) bead. A 10 fl oz cartridge will extrude approx. 13.6 ft of a 3/8” bead.
Available Sizes

Sizes

10.1 oz

Tubes/Case

12

Lbs./Case

12

Cases/Pallet

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

Kling-Tite Super Surface Protection

“Surface Protection”

Stacks Image 544053
Stacks Image 544057
Stacks Image 544059
$42.49

No Tape or Fasteners Needed
Fast & Easy Installation, Just Press in Place
Non-Skid Surface and Easy to Clean
Works Great on Floors, Especially Wood

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Kling-Tite™ Super Surface Protection is a special formulated film that has the ability to cling to most surfaces securely without the use of adhesive. It is safe for all surfaces and once removed does not leave any residue behind to cleanup which in a lot of cases will require professional cleaning.

This is especially true when used in high traffic areas on carpet, vinyl or even ceramic tile where the residue gets imbedded into the grout itself. Adhesive films will also cause damage to the finish on hardwood flooring.
Basic Uses
Anything that needs protection that it can cling to - Wall, Floors, Carpets, Gym Floors, Tubs and Etc.
Features
  • Safe for all surfaces to be protected
  • Bonds to surfaces with No Adhesive
  • Does not require mechanical fasteners or taping to keep it in place
  • No costly cleanup from sticky residue imbedded
  • Fast & easy installation, just press in place
  • Superior tear & puncture resistance to others
  • Non-skid surface and easy to clean
  • Commercial grade strength for wear resistance
  • Cost effective and labor saving
  • Can be applied to almost any clean dry surface*
  • Re-Useable and 100% Recyclable
  • No VOCs and Environmentally Friendly
  • Limited Lifetime Warranty
  • Made in USA

* avoid high nap carpet

Sticks to Surface Without Adhesive, Leaving No Residue

Kling-Tite is the easiest and most cost effective solution to protecting surfaces from scrapes, scratches and wear and tear. It has superior puncture and tear resistance when compared to other surface protectors and offers Industrial grade durability.

The applications for Kling-Tite are endless. Whether you are protecting carpet and vinyl from high traffic areas, protecting appliances during moving or gymnasium floors when having social events to using it for taping off walls or floors when spray painting, no other product holds up better. Just roll it out on the surface to be protected and press in place, it is that easy.
Stacks Image 32043
The applications for Kling-Tite are endless. Whether you are protecting carpet and vinyl from high traffic areas, protecting appliances during moving or gymnasium floors when having social events to using it for taping off walls or floors when spray painting, no other product holds up better. Just roll it out on the surface to be protected and press in place, it is that easy.

Stacks Image 32981
Available Sizes

Sizes

24" x 300'

36" x 300'

Rolls/Case

1

1

Lbs./Case

5

7.5

Cases/Pallet

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

MaX-Shield Perimeter Sill Flash

“Avoid Trapped Moisture Under Wall Plates”

Stacks Image 546142
$36.97

Seal Joints from Air & Moisture Infiltration
Conforms to Irregular Surfaces
Peel and Stick Application

More Details..
Availability and Sizes
Max Shield is a new product in energy solutions/ building materials used in construction that is a air barrier and water seal that helps prevent mold, mildew, rot and decay, reduces utility cost, improves energy efficiency

Lithifier Masonry Densifier

“Deepest Penetrating Hardening Sealer”

Stacks Image 544175
$299.99

Seals Concrete
Penetrates Concrete up to 7" Deep
Helps Reduce Musty Basement Smells

More Details..
Stacks Image 35047
Stacks Image 4929
Product Description
Stacks Image 4938
Lithifier™ is the deepest penetrating concrete sealer/waterproofing product on the market. It has shown to penetrate up to 7” in concrete. Lithifier has been designed to make concrete virtually impermeable and still allows the concrete to breath. The molecular structure is made up of sphere shape microscopic ball bearings allowing it to fill the tiny capillaries preventing water, efflorescence and other contaminants from migrating to the surface.
Stacks Image 35354
Basic Uses
Concrete Flat work where sealing is important: Raw Concrete Floors: Basements: Indoor Concrete

Harden and Seal Concrete

Stacks Image 32043
Concrete is a vary porous material that expands and contracts with moisture and temperature changes. Left untreated, concrete can start to dust, wear and lose strength and eventually start cracking. Applying Lithifier™ Masonry Densifier to concrete fills in those porous pores and increasing surface density.
When new concrete starts the curing process, excess water rises to the surface making it much softer than the slab's core. It also increases the water to cement ratio, which further weakens the surface. Lithifier address this problem by binding to available lime in a pozzolanic fashion, creating additional cementitious material and strengthening the surface.

Reduce Your Concrete Repairs

Features
• For Residential or Commercial Use
• Seals Concrete up to 7" Deep
• Aids in Blocking Efflorescence
• Breathable, Impermeable and Clear
• Internal Foundation Waterproofing
• Protects Against Spalling and Cracking
• Helps Create Healthier Environment
• Protects from Wind Driven Rain
• Excellent Coverage
• Limited Lifetime Warranty
• Made in USA

Available Sizes

Sizes

1 Gallon

5 Gallon

Units/Case

4

1

Lbs./Case

12

50

Cases/Pallet

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

MetalLoc Roofing Sealant

"Superior Adhesion on Kynar Coated Metal"

Stacks Image 544323
Stacks Image 544327
$8.99

UV Resistant and Stays Flexible
Odor Free With No VOCs
Paintable Within 1 Hour
Can Applied in Poor Weather Conditions

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 33900
MetalLoc™ Sealant uses advanced polymer technology to provide superior adhesion for metal roofing systems. Using this advanced sealant technology, MetalLoc was specially formulated to stay watertight and yet accommodate building movement. This sealant forms a flexible, air tight water resistant seal that maintains its integrity without fracturing and can be installed in wet and cold weather. Will never crack, peel or separate.
Basic Uses
Can be used on projections, pipes, vents, termination bars, field seams, butt joints, fish mouths, pitch pans, soil stacks and wall joints.
Stacks Image 33913
Features
• Works great on Kynar coated metal
• Can apply in cold and wet conditions
• UV Resistant and stays flexible
• Odor free with no VOCs
• Paintable in 1 hour with water-based paints
• Will not mold or mildew
• ASTM C-920 Class 25
• USDA and FDA approved
• Lifetime seal
• No VOCs and Environmentally Friendly
• Limited Lifetime Warranty
• Made in USA
Coverage
A 10 fl oz cartridge will extrude approx. 30.6 ft of a 1/4” (6 mm) bead. A 10 fl oz cartridge will extrude approx. 13.6 ft of a 3/8” bead.
Available Sizes

Sizes

10.1 oz

Tubes/Case

12

Lbs./Case

12

Cases/Pallet

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

Scuf-Tuf Wood Floor Protection

"Protection and Sticks Without Adhesives"

Stacks Image 544005
Stacks Image 544009
$42.49

No Tape or Fasteners Needed
Fast & Easy Installation
Just Roll and Press in Place

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Scuf-Tuf™ Wood Floor Protection is a special formulated film designed to bond to surfaces without the use of adhesive so no residue is left embedded in the floor.
Scuf-Tuf is safe for all surfaces and the easiest and most cost effective solution to protecting hardwood flooring from being damaged from heavy foot traffic, chairs/tables, excessive wear and tear.

Basic Uses
Anything that needs protection that it can cling to - Wall, Floors, Gym Floors, Tubs and Etc.

Reduces Damage

Stacks Image 32978
Using adhesive backed films on wood floors to protect the finish from getting damaged will not only ruin the finish but will leave adhesive residue imbedded into the wood grains damaging the finish which is extremely expensive to repair and refinish.

An Ounce of Prevention

Stacks Image 32043
You’ve made the investment in your flooring so what can you do to help ensure your flooring stays looking like new? Installing Scuf-Tuf is really a great way to protect the floor from high traffic events or even during construction.

Help protect floors when grit gets stuck to the bottom of shoes which can really scratch floors and ruin finishes.



Features
  • Safe for all surfaces to be protected
  • Bonds to surfaces with No Adhesive
  • Does not require mechanical fasteners or taping to keep it in place
  • No costly cleanup from sticky residue imbedded
  • Fast & easy installation, just press in place
  • Superior tear & puncture resistance to others
  • Non-skid surface and easy to clean
  • Commercial grade strength for wear resistance
  • Cost effective and labor saving
  • Can be applied to almost any clean dry wood surface
  • Re-Useable and 100% Recyclable
  • No VOCs and Environmentally Friendly
  • Limited Lifetime Warranty
  • Made in USA

Available Sizes

Sizes

24" x 300'

36" x 300'

Rolls/Case

1

1

Lbs./Case

5

7.5

Cases/Pallet

48

48

Customizable Sizes Available

RoofLoc Roofing Sealant

"Superior Waterproofing Roof Sealant"

Stacks Image 544369
Stacks Image 544372
$8.99

700% Elongation, 50% Joint Movement
Paintable - Will Not Crack or Yellow
Requires No Primer or Mixing

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
RoofLoc™ Sealent is specially formulated for final detailing and sealing of any roof penetrations in commercial roof applications. It is an acrylic urethane elastomeric sealant that offers superior adhesion, elasticity and exceptional durability. Over 700% elongation RoofLoc still maintains its seal without fracturing still has tremendous shear strength and holding power. It is Class A rated sealant and Class 25 for 50% joint movement. Whether around HVAC units or other vents and penetrations, RoofLoc bonds to almost all roof coatings including EDPM, rolled roofing, shingles, etc.
Basic Uses
Can be used on projections, pipes, vents, termination bars, field seams, butt joints, fish mouths, pitch pans, soil stacks and wall joints.
Stacks Image 33636
Features
• Superior Adhesion to Almost all Substrates
• 700% Elongation
• Resists Dirt and Dust
• Ready to Use, No Mixing
• Paintable
• Will Not Crack or Yellow
• Odor Free with No VOCs
• ASTM C-920 Class 25, 50% Joint
• USDA and FDA Approved
• No Primer Required
• Interior or Exterior Use
• Lifetime Seal
• Compatible with All Building Materials

Coverage
A 10 fl oz cartridge will extrude approx. 30.6 ft of a 1/4” (6 mm) bead. A 10 fl oz cartridge will extrude approx. 13.6 ft of a 3/8” bead.
Available Sizes

Sizes

10.1 oz

Tubes/Case

12

Lbs./Case

12

Cases/Pallet

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

Seam Sheathing Tape

“Keeps Air & Moisture Out Of Seams”

Stacks Image 546451
$21.97

Sticks to Wet OSB & Plywood
Seals Sheathing Seams
Stops Air and Moisture Infiltration
Peel and Stick Application

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Seam Sheathing Tape is design to aid in reducing moisture and air infiltration at the seams. This product will adhere to OSB even in wet or freezing weather conditions and really is a fur flashing tape. It can has the ability to seal up many of the sheathing products* that are used on the market today. This tape can also seal rips, tears or fastener heads on many house wrap product.*

Seam Sheathing Tape provides a permanent seal on joints and affordably aids in the reduction of heating and cooling costs. It bonds aggressively adheres when no other tape will-even in severe cold and wet weather conditions due to the use of our Micro-Grab Adhesive Technology™.


Stacks Image 4177
Stacks Image 4174
Basic Uses
This waterproof seam flashing tape can be used on house wrap, or Sheathing product. *Due to the large variety of house wraps and sheathing products please contact us for compatibility updates.

Even Seals Up OSB Seams

On of the big challenges in construction today is finding and using products that keep the shell dry and seal air leaks. Outdoor air that leaks indoor makes it difficult to maintain comfort and energy efficiency. In addition, air leakage accounts for as much 40% of the energy used for heating and cooling in a typical home.
Stacks Image 32526

Air sealing a structure starts with the building envelope and unfortunately, there are hundreds of penetrations through a typical home's exterior. These cracks or gaps are often within the framing details and from penetrations for doors, windows, electrical, plumbing and etc.

Joint or seams in exterior sheathing that have air leaks can be address by using “seam tape.” Many tapes on the market do not perform well in this environment. What works in a lab, often does not work well in the field. Using Weather-Bloc’s Seam Sheathing Tape is actually designed for the harshest construction conditions and a diverse array of building materials.
Features
  • For Residential or Commercial Use
  • No Primer Required
  • Self-adhering, Peel and Stick
  • Easy Start™ Edge For Fast Installation
  • Air and Moisture Barrier
  • Helps Stop Energy Loss
  • Twice as Strong as Other Tapes
  • Seals around nails
  • Stays Elastic, Does Not Oxidize or Dry Out
  • Conforms to Surfaces Irregularities
  • No Drool or Staining
  • Stick to OSB, Vinyl, Foams*, Wood and Others
  • No Heated Storage Required
  • Workable for Precise Placement
  • Thin Design for Better Formability
  • Compatible with All Building Materials*
  • Helps Stop Mold and Mildew
  • Available in 4 Widths
  • No VOCs and Environmentally Friendly
  • Micro-Grab Adhesive Technology
  • 5 year Shelf Life
  • Limited Lifetime Warranty
  • Made in USA
Available Sizes

Sizes

1.5" x 75'

2" x 75'

3" x 75'

4" x 75'

Rolls/Case

24

24

16

12

Lbs./Case

23

30

30

30

Cases/Pallet

48

48

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

SIPs Seam Tape

“Best Structural Insulated Panel Tape”

Stacks Image 546543
$33.97

Best SIP Seam Tape
Bonds to OSB
Adheres to Wet and Cold Surfaces
100% Air & Moisture Barrier

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
SIPs Seam Tape has been designed to withstand heavy building movement and provide a air and moisture barrier. Sips Seam Tape has superior strength and will not tear even under the most severe building movement. Our formulation also provides a 100% air and moisture barrier to help SIPs produce a great blower door result. This high performance tape will adhere easily to OSB and bond in extreme cold and wet weather due to having MicroGrab™ Adhesive Technology. Weather-Bloc's SIPs tape is simply the best on the market.
Basic Uses
Can be used on joints on walls and roofs. Can be used on any traditional points were a air and moisture barrier is necessary. Can be used for joints on other type sheathings.
Features
  • Prevents 100% Air and Moisture Infiltration
  • Adheres to We or DryOSB
  • Provides Long-Term Joint Protection
  • Thinner for Easier Joint Application
  • Moves With Joint Expansion and Contraction
  • Conforms to Surfaces Irregularities
  • Stays Flexible Forever
  • Peel and Stick Installation
  • Maintains a Permanent Seal
  • No Primer Required
  • Widest Range of Installation Temperatures
  • Compatible with All Building Materials
  • Seals around nails
  • No Drool or Staining
  • Heated Storage NOT Required
  • Aids in Stopping Mold and Mildew
  • 5 year Shelf Life
  • Environmentally Friendly with NO VOCs
  • Made in USA
Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.

Insure Your SIP Joints!

There are so many advantages to building with Structural Insulated Panels (SIPs). The biggest one is energy efficiency and this is accomplished by making sure the joints are air sealed properly. Many SIPs manufacturers have found that SIPs Seam Tape offers and additional level of air sealing protection to the seams. Relying on just sealant at these joints, makes the installing technician role of caulking extremely critical. Any gap or missing caulk can cause the SIP panel to have condensation issues at that joint.
Stacks Image 6324
By using Weather-Bloc Seam Tape in combination with SIPs joint sealant gives that joint a 100% air barrier. This tape can not only be used on roof panels but we recommend also using them on wall panels. The thin tape design allows for drywall to be install without noticeable humps. Protect your SIPs project with Weather-Blocs SIPs Seam Tape.
Stacks Image 4177
Stacks Image 4174
Stacks Image 5180
Condensation is formed when warm moist air meets cold air. One element of Moisture Management is understanding and controlling where condensation occurs. If condensation occurs due to an air leak, the moisture can cause serious damage to a structure. In building construction, the more air tight the building, the more energy efficient it is.

One of the more innovative building systems in the market is Structural Insulated Panels (SIPs). The are up to 60% more energy efficient than conventional building. The secret to their energy efficiency is "they can be constructed very air tight with less effort." The only real energy weakness that SIPs has is the seams. If the seams are constructed air tight, SIPs is one of the best structural building products on the market. If the seams leak air, it can cause problems just like an other construction system.
When moisture is allowed to enter a SIPs structure, moisture can break down the structural integrity of the system. OSB is a wood product and being exposed to moisture for a time will cause the OSB sheet to rot and decay.

The real science is the understanding of the joints and that the caulk that is used at the joints is not ment to be an adhesive (glue) but rather a air and moisture barrier. Continues caulk through the entire joint is critical - no gaps or caulking to thin.

Joints that are perfectly caulked can be very difficult to obtain. Experts recommended that a secondary "line of defense" be used to stop fair and moisture from infiltrating in through the joint. The solution is Weather-Bloc's SIPs Seam Tape. It works because it stop 100% of air or moisture infiltration at the joint, can be installed in most weather conditions and can handle building movement without losing its effectiveness.
Available Sizes

Sizes

3" x 75'

4" x 75'

6" x 75'

Rolls/Case

20

12

8

Lbs./Case

12

27

24

Cases/Pallet

48

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

Seam Rap Tape

“House Wrap Seam Tape”

Stacks Image 542922
$12.80

Help Seal Seam on Most Housewraps
Repairs Holes or Tears
Durable and Easy to Use
Stops Air Flow

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Seam Sheathing Tape is design to aid in reducing moisture and air infiltration at the seams. This product will adhere to OSB even in wet or freezing weather conditions and really is a fur flashing tape. It can has the ability to seal up many of the sheathing products* that are used on the market today. This tape can also seal rips, tears or fastener heads on many house wrap product.*

Seam Sheathing Tape provides a permanent seal on joints and affordably aids in the reduction of heating and cooling costs. It bonds aggressively adheres when no other tape will-even in severe cold and wet weather conditions due to the use of our Micro-Grab Adhesive Technology™.


Stacks Image 4177
Stacks Image 4174
Basic Uses
This waterproof seam flashing tape can be used on house wrap, or Sheathing product. *Due to the large variety of house wraps and sheathing products please contact us for compatibility updates.

Even Seals Up OSB Seams

On of the big challenges in construction today is finding and using products that keep the shell dry and seal air leaks. Outdoor air that leaks indoor makes it difficult to maintain comfort and energy efficiency. In addition, air leakage accounts for as much 40% of the energy used for heating and cooling in a typical home.
Stacks Image 32526

Air sealing a structure starts with the building envelope and unfortunately, there are hundreds of penetrations through a typical home's exterior. These cracks or gaps are often within the framing details and from penetrations for doors, windows, electrical, plumbing and etc.

Joint or seams in exterior sheathing that have air leaks can be address by using “seam tape.” Many tapes on the market do not perform well in this environment. What works in a lab, often does not work well in the field. Using Weather-Bloc’s Seam Sheathing Tape is actually designed for the harshest construction conditions and a diverse array of building materials.
Features
  • For Residential or Commercial Use
  • No Primer Required
  • Self-adhering, Peel and Stick
  • Easy Start™ Edge For Fast Installation
  • Air and Moisture Barrier
  • Helps Stop Energy Loss
  • Twice as Strong as Other Tapes
  • Seals around nails
  • Stays Elastic, Does Not Oxidize or Dry Out
  • Conforms to Surfaces Irregularities
  • No Drool or Staining
  • Stick to OSB, Vinyl, Foams*, Wood and Others
  • No Heated Storage Required
  • Workable for Precise Placement
  • Thin Design for Better Formability
  • Compatible with All Building Materials*
  • Helps Stop Mold and Mildew
  • Available in 4 Widths
  • No VOCs and Environmentally Friendly
  • Micro-Grab Adhesive Technology
  • 5 year Shelf Life
  • Limited Lifetime Warranty
  • Made in USA
Available Sizes

Sizes

1.5" x 75'

2" x 75'

3" x 75'

4" x 75'

Rolls/Case

24

24

16

12

Lbs./Case

23

30

30

30

Cases/Pallet

48

48

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

Solar Shield Elastomeric Roof Coating

"Dramatically Lowers Roof Temperatures"

Stacks Image 544439
Stacks Image 544443
$299.99

Great for Repairs or Coating
Superior Flexibility to Expand and Contract
Durability and Greater Waterproofing Protection

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Solar Shield™ Elastomeric Roof Coating is a specially formulated reflective elastomeric roof coating that reflects 93% of infrared rays of the sun and is designed for category 5 weather conditions. This product can dramatically reduce roof temperatures saving on air conditioning cost. It dries to a thick rubber-like membrane.

What makes this coating superior to other roof coatings is its elongation and flexibility properties to expand and contract with roof surfaces even in cold weather conditions. Solar Shield has excellent adhesion to almost all surfaces, including asphalt shingles, built-up roofs, urethane foam, concrete, gravel roofs, cement tiles, galvanized metal, wood and just about all other surfaces. It is not affected by salt water. When applied to metal, Solar Shield will help prevent corrosion. It has extreme durability and can withstand intense heat as well as hurricane wind conditions.

Basic Uses
Solar Shield can be used where a water tight seal is crucial. Not only can it repair and seal existing roofs, but can repair leaky gutters, gaps around chimney flashing, valleys, vents, skylights and just about any other area of the roof there is water infiltration.

How to Stop Window and Door Leaks

Black colored roofs have many disadvantages as the can get very hot, consuming more energy and more importantly speeding up the deterioration process of the roofing system. The solution is a “Cool Roof.” Using Solar Shield Elastomeric Roof Coating can help create that cool roof.
Stacks Image 33195
Using solar shield can lower cooling costs and extend roof life by apply its light colored coating over an existing roof. This coatings can provide a water tight surface as well as reflecting heat and reducing heat transfer to the inside of the building. By reducing the roof temperature it can also extends the life of HVAC systems and reduces maintenance costs.
Stacks Image 33197
The use of Solar Shield on roof surfaces is a simple building solution that can save money and extend building life. Beyond the building itself, Solar Shield roofs can also help the environment and local communities by reducing the “Urban Island Effect.”Reducing roof temperature can also save power from the local power plant lowering peak electricity demand and reducing plant emissions. Solar Shield may work toward providing LEED credits.
Features
  • For Residential or Commercial Use
  • Can Be Used on New or in Repairing Existing Roofs
  • Dramatically lowers roof temperatures
  • Reflects over 93% of infrared rays of the Sun
  • Energy saving, reduces air conditioning costs
  • No special equipment or tools needed to apply coating
  • Easy soap and water cleanup, saves time, money and labor
  • More cost effective than most other roof coatings or systems
  • Superior flexibility to expand and contract with roof surfaces
  • Offers extreme durability and greater waterproofing protection
  • Not effected by salt water and helps protect metal from corrosion
  • Excellent adhesion to almost all types of surfaces in all environments
  • No VOCs and Environmentally Friendly
  • Limited Lifetime Warranty
  • Made in USA


Available Sizes

Sizes

1 Gallon

5 Gallons

Units/Case

1

1

Lbs./Case

12

60

Cases/Pallet

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

Truss-tite Energy Separator

“Thermal Break Reduces Energy Loss”

Stacks Image 544103
Stacks Image 544107
$8.99

Acts as a Thermal Break
Reduces or Eliminates Conductivity
Reduces Vibration and Sound

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Truss-tite™ is a gasket that is designed as a thermal break for roof trusses. Manufactured using a cross linked foam, this product has the ability to rebound. This product creates a thermal break that reduces the flow of energy between the top plate and the roof truss or other truss intersections.
Basic Uses
Designed to be used as a thermal break for metal or wood trusses. Maybe used as a thermal/vibration break in other applications.

Truss-tite could also be used as a Thermal breaks:
1) on the outside face of all external wall framing that forms part of the thermal envelope
2) between top plates and bottom truss chords or rafter/ceiling joists at external walls
3) between soffit bearers and the wall framing they are attached to
4) for skillion roofs, to the outside edge of the rafter or top truss chord as well as around the soffit framing.

Features
• Acts as a Thermal Break
• Separates Product and Possible Conductivity
• Can reduce Vibration or Sound Transmission
• Peel and Stick for Fast, Easy Installation
• Creates a Permanent Seal
• Adheres to Damp, Wet and Cold Surfaces
• Maintains a permanent seal
• Crossed Linked for Anti-Crush Properties
• Use as Backer Rod to Caulk
• No Primer Required
• Widest Range of Installation Temperatures
• Workable for Precise Placement
• Conforms to Surfaces Irregularities
• Stays Flexible Forever
• Peel and Stick Installation
• Helps Reduce Energy Loss
• 5 year Shelf Life
• Environmentally Friendly with NO VOCs
• Made in USA

Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.

Thermal Break Reduces Energy Loss

A thermal break or thermal barrier is an element of low thermal conductivity placed in an assembly to reduce or prevent the flow of thermal energy between conductive materials.
Seal Box Sill
Steel framing is highly conductive – it transmits heat very effectively. A house built with steel framing and no thermal breaks would lose a lot of heat to the outside. Even wood framing can lose heat to the outside. Truss-tite can help aid in the reduction of energy loss.
Stacks Image 34227
Stacks Image 34224
Available Sizes

Sizes

3/4" x 25'

1.5" x 25'

3.5” x 25'

Rolls/Case

4

4

4

Lbs./Case

1

1

2

Cases/Pallet

48

48

48

Customizable Sizes Available

Energy Triple Seal seal is better than Protecto Energy Sill Sealer or Triple Guard Energy Sill Sealer. Seals off three adhesive membrane areas and stops infiltration from framing and foundation, sill plate, mud sill and other interfaces. The only true self-adhesive air and moisture sill barrier with a cross-linked gasket.

ThresTite Threshold Barrier

“Seals Those Leaking Door thresholds Permanently”

Stacks Image 545198
$9.99

Stops Air & Moisture Entering Threshold
Prevents Threshold Warping & Racking
Helps Protect Finished Floors
Reduces Energy Costs

More Details..
Availability and Sizes
Availability and Sizes
Product Description
ThresTite™ Door Threshold Gasket System is a permanent gasket seal designed to eliminate air and moisture from entering slab-on-grade door thresholds. Made from closed cell cross-linked polyethylene, ThresTite has the ability to compress and re-adjust for a permanent perfect fit during construction and when the building settles or moves. This peel and stick product uses Weather Bloc's high performance MicroGrabTM Adhesive Technology that allows adhesion in extreme cold and wet weather.


Seal Those Leaky Doors - Permanently!
One of the largest consumer complaints in construction is drafty doors. Air getting through the threshold and causing discomfort is that major cause for customer dissatisfaction. For years, contractors have used caulk as hopeful solution but it has failed miserably.
This infrared scan illustrates the amount of heat loss at the threshold of this door. This not only causes drafts but cost 100's of dollars every year in energy loss.
Features
• Dramatically More Effective than Caulking
• Protects Finished Floors & Structural Framing
• Prevents Warping and Racking
• Reduces Energy Costs
• Conforms to Irregular Concrete
• Rebound Recovery Formulation
• Peel and Stick Installation
• Helps Reduce and Deaden Sound
• Maintains a Permanent Seal
• Less Expensive than Caulking
• No Primer Required
• Widest Range of Installation Temperatures
• Workable for Precise Placement
• Compatible with All Building Materials
• Lifetime Limited Warranty*

Basic Uses
Additional Benefits
Can be used under door thresholds with slab-on-grade or wood construction. This product can be used anywhere a gasket is needed.  
Easy Start Peel and Stick™permits a quicker release of the backer that provides faster installation.
By examining thresholds from different door manufactures, one will notice that they are extremely difficult to caulk. The other factor is the unevenness of the concrete and stiffness of the threshold making the sealing uneven as well. The real long-term solution is Weather-Bloc's ThresTite gasket. With Peel and stick for waterproofing and cross-linked polyethylene for that rebounding type memory foam give ThresTite a permanent threshold seal.
ThresTite™
Caulked
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Can be installed successfully at temperature as low as -30° F.
By not allowing air and moisture to enter into the building envelope, one can save up to 50% on utility cost.
Can be installed successfully at temperature as low as -30° F.
Our special Micro-Grab Technolgy allows the adhesive to adhere in wet conditions. Testing has shown that it can even be installed under water.
Crossed linked to provide elongation with recovery properties.
Made with Pride in the United State of America.
Designed and manufactured with environmental awareness this product has No VOCs and is earth friendly.
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including cold and wet weather adhesion.
A five year shelf life gives contractors and distributors the opportunities to buy in large volumes and reduce costs.
Availability and Sizes
ThresTite™ is a new product in building materials that acts as a air stop, blocks water infiltration,  helps prevents black mold, fungus, mildew and improves home energy efficiency, and cuts utility cost.

WateRepel Waterproofing

“Dries Transparent and Can be Painted”

Stacks Image 544501
Stacks Image 544505
$59.95

Excellent Coverage
Protects and Seals
Dries Transparent

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
WateRepel™ is a special formulated clear water base sealer designed to offer long-term waterproofing protection. WateRepel is a silicone/silane transparent waterproofing sealer and provides superior protection from wind driven rain on almost all porous masonry surfaces.

WateRepel is fast drying, leaves no tacky finish, provides a low cost application and produces a water repellent surface without staining or significantly changing the color of the concrete or masonry surface. It requires no special tools to apply, can be sprayed, rolled or brushed on.
Basic Uses
Seals and protects lumber.
Stacks Image 34647
Features
• Seals and Protects Wood
• Dries Transparent and Can be Painted
• Excellent Coverage and Fast curing
• Leaves NO Tacky Surface
• Only Requires one Application
• Designed for all Masonry surfaces
• Performs in Extreme Weather Conditions
• Gives Excellent Protection from Wind Driven Rain

Coverage
200 square feet per gallon.
Available Sizes

Sizes

1 Gal

Units/Case

1

Lbs./Case

10

Cases/Pallet

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

WeatherMax Pro Flash - Mini

“The Mini Size in Waterproofing Protection”

Stacks Image 545845
$9.79

Mini Sized Roll For Smaller Jobs
Sticks in all Wet Conditions
All Purpose Flashing Tape
No Priming Necessary

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
WeatherMax Pro Flash™ is a high-performance peel & stick flashing tape that has been designed to work in wet weather conditions. In fact, this product has been test and will adhere to OSB even under water.

Weather-Bloc Systems experience in job site realities developed this tape for the contractors to continue working in less than ideal weather conditions and still have the ability to install a flashing tape that seals and protects. Based on new hybrid adhesive technology called Micro-Grab, this tape performs when other fail.

WeatherMax Pro Flash meets and exceeds ASTM E-2112 for sealing around windows and doors. Manufactured with a high strength, puncture resistant facer, this tapes performs as a great air and moisture barrier.

As part of the building envelope system, WeatherMax Pro Flash can help aid in the reduction of water damage, air infiltration and improve the energy efficiency of the structure.
Basic Uses
This waterproof tape can be used on new or existing construction for fenestration products such as patio doors, entrance doors, windows and skylights as a flashing-waterproof material. Can be used as a patch material on house wrap.

How to Stop Window and Door Leaks

Stacks Image 32043
One of the best methods of stopping window and doors from leaking is the proper installation of WeatherMax Pro Flashing Tape. It is recommended to cut back the house wrap from the window opening to allow flashing tape to adhere to the OSB and stop lateral water infiltration from behind the house wrap. Water always has the possibility of getting behind the house wrap and creating leaks at the openings. Most flashing tapes have a difficult time adhering to OSB, but no problem for WeatherMax.
Features
  • For Residential or Commercial Use
  • No Primer Required
  • Self-adhering, Peel and Stick
  • Easy Start™ Edge For Fast Installation
  • Air and Moisture Barrier
  • Helps Stop Energy Loss
  • Twice as Strong as Other Tapes
  • Seals around nails
  • Stays Elastic, Does Not Oxidize or Dry Out
  • Conforms to Surfaces Irregularities
  • No Drool or Staining
  • Stick to OSB, Vinyl, Fiberglass Frames, Wood and Others
  • No Heated Storage Required
  • Workable for Precise Placement
  • Thin Design for Better Formability
  • Compatible with All Building Materials*
  • Helps Stop Mold and Mildew
  • Available in 4 Widths
  • No VOCs and Environmentally Friendly
  • Micro-Grab Adhesive Technology
  • 5 year Shelf Life
  • Limited Lifetime Warranty
  • Made in USA
Available Sizes

Sizes

4" x 15'

6" x 15'

4" x 75'

6" x 75'

9" x 75'

12" x 75'

Rolls/Case

20

20

12

8

8

4

Lbs./Case

10

14

27

24

21

24

Cases/Pallet

48

48

48

48

48

25

Customizable Sizes Available

WaterStop Transition Boot

“Protects The Footings”

Footing Protection that stops water
$33.98

Protect Footing
Stops Water at Joint
Peel and Stick Application
Prevents Cracking from Moisture

More Details..

[Product Information] [Sales Literature] [Installation Instructions] [Technical Specifications] [MSDS]

Stacks Image 35548

Transition Boot

Stacks Image 35553
Product Description
Stacks Image 4938
WaterStop™ Transition Boot is a peel and stick membrane that helps seal off the moisture migration through the foundation wall and footing assembly. Designed with MicroGrab™Adhesive Technology this tape can be installed to most building materials in cold and wet conditions. WaterStop Transition Boot is an extremely strong membrane and can withstand the expansion and contraction of dissimilar products. This tape can create a 100% waterproof joint.
Stacks Image 35574
Stacks Image 35571
Basic Uses
Waterproofing below grade such as transitions, boots, patches or other areas that require waterproofing.

Stacks Image 35737

Give Water The Transition Boot

Reducing foundation leaks start at the top with good surface water control moving the water away from the structure. However, high water tables, clogged drains, heavy rains or flooding can create water pressure that can push water where we would prefer it not to go - between the footer and foundation wall interface.
Stacks Image 35732
Soil that is backfilled against the walls of a foundation will always be uncompressed or looser and more permeable than the “virgin” soil due to the upheaval by the excavation process.

Higher permeability means that water will naturally collect against the foundation wall. Even with exterior foundation drains water under pressure can get between the footing and the wall and create serious problems. The use of Weather-Bloc’s WaterStop Transition Boot can help water infiltration at foundation-footing interface.

Protect Your Footings

Features
• Superior Bonding to Most Surfaces
• Helps Eliminate Cracks and Heaving
• Adheres in Cold Weather -30ºF
• Helps Maintain Water Drainage
• Backfill Durable Membrane
• Provides Full Capillary Break
• Stops Infiltration of Soil Gasses
• Helps Prevent Wall Failure
• Available in 3 Widths
• Workable for Precise Placement
• Thin Design for Better Formability
• No Heated Storage Required
• Conforms to Surfaces Irregularities
• Compatible with Most Building Materials
• Helps Stop Mold and Mildew
• No VOCs and Environmentally Friendly
• Micro-Grab Adhesive Technology
• Works on Wood Foundations as Well
• Limited Lifetime Warranty
• Made in USA

Available Sizes

Sizes

6" x 75'

9" x 75'

12" x 75'

Rolls/Case

8

4

4

Lbs./Case

26

16

26

Cases/Pallet

48

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

WeatherMax Pro Flash

“Ultimate Protection Flashing Tape”

Stacks Image 545794
$33.79

Mini Sized Roll For Smaller Jobs
Sticks in all Weather Conditions
Alaskan Grade Adhesive
No Priming Necessary

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
WeatherMax Pro Flash™ is a high-performance peel & stick flashing tape that has been designed to work in wet weather conditions. In fact, this product has been test and will adhere to OSB even under water.

Weather-Bloc Systems experience in job site realities developed this tape for the contractors to continue working in less than ideal weather conditions and still have the ability to install a flashing tape that seals and protects. Based on new hybrid adhesive technology called Micro-Grab, this tape performs when other fail.

WeatherMax Pro Flash meets and exceeds ASTM E-2112 for sealing around windows and doors. Manufactured with a high strength, puncture resistant facer, this tapes performs as a great air and moisture barrier.

As part of the building envelope system, WeatherMax Pro Flash can help aid in the reduction of water damage, air infiltration and improve the energy efficiency of the structure.
Basic Uses
This waterproof tape can be used on new or existing construction for fenestration products such as patio doors, entrance doors, windows and skylights as a flashing-waterproof material. Can be used as a patch material on house wrap.

How to Stop Window and Door Leaks

Stacks Image 32043
One of the best methods of stopping window and doors from leaking is the proper installation of WeatherMax Pro Flashing Tape. It is recommended to cut back the house wrap from the window opening to allow flashing tape to adhere to the OSB and stop lateral water infiltration from behind the house wrap. Water always has the possibility of getting behind the house wrap and creating leaks at the openings. Most flashing tapes have a difficult time adhering to OSB, but no problem for WeatherMax.
Features
  • For Residential or Commercial Use
  • No Primer Required
  • Self-adhering, Peel and Stick
  • Easy Start™ Edge For Fast Installation
  • Air and Moisture Barrier
  • Helps Stop Energy Loss
  • Twice as Strong as Other Tapes
  • Seals around nails
  • Stays Elastic, Does Not Oxidize or Dry Out
  • Conforms to Surfaces Irregularities
  • No Drool or Staining
  • Stick to OSB, Vinyl, Fiberglass Frames, Wood and Others
  • No Heated Storage Required
  • Workable for Precise Placement
  • Thin Design for Better Formability
  • Compatible with All Building Materials*
  • Helps Stop Mold and Mildew
  • Available in 4 Widths
  • No VOCs and Environmentally Friendly
  • Micro-Grab Adhesive Technology
  • 5 year Shelf Life
  • Limited Lifetime Warranty
  • Made in USA
Available Sizes

Sizes

4" x 15'

6" x 15'

4" x 75'

6" x 75'

9" x 75'

12" x 75'

Rolls/Case

20

20

12

8

8

4

Lbs./Case

10

14

27

24

21

24

Cases/Pallet

48

48

48

48

48

25

Customizable Sizes Available

Window Guard

“Protects Window Frames from Damage”

Stacks Image 546250
$12.97

Protects Window Frames From Mortar
Separates Unlike Building Materials
Insulates Around Frame
Can Be Caulked

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Window Guard™ is a protective gasket seal designed to separate window or door frames from incompatible materials. Window Guard helps prevent damage to any claded window or door from corrosion and decolorizing from Stucco, Mortar, Cement and Acid based chemicals. This extremely cost effective product is made from closed cell cross-linked polyethylene and uses Weather Bloc's peel and stick MicroGrabTM Adhesive Technology that allows adhesion in extreme cold and wet weather.
Basic Uses
Works to protect the frame of doors or window. Anywhere a Thermal break or separation is needed.
Features
Stop corrosion to the frame
Separates acids-based products from cladding
Helps prevent staining and oxidation
Creates a seal around frame
Adheres to damp, wet and cold surfaces
Peel and stick for easy install
• Separates and provides a thermal break
• Maintains a permanent seal
• Crossed Linked for Anti-Crush Properties
• Use as Backer Rod to Caulk
• No Primer Required
• Widest Range of Installation Temperatures
• Workable for Precise Placement
• Moves With Joint Expansion and Contraction
• Conforms to Surfaces Irregularities
• Stays Flexible Forever
• Peel and Stick Installation
• Stops Energy Loss
• Stops Bugs from Entering at Joint
• 5 year Shelf Life
• Environmentally Friendly with NO VOCs
• Made in USA
Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.

Protect and Separate Door Frames

Architectural aluminum is widely used for window and door frames because it is attractive, durable, and requires little maintenance. However, unprotected aluminum interacts with cement-based materials, resulting in severe frame damage. IT is important to protect Metal window and door frames and Window Guard is one way to help.
Stacks Image 34227
Stacks Image 34224
Stacks Image 5180
Damage to Window and Door frames often occur during the handling and installation. When masonry products, such as concrete, mortar or plaster come in contact with the metal frame due to run-down, splattering or splashing, serious corrosion problems can occur to the frames. Even after the units are installed, construction like brickwork or roofing can cause additional problems if the units are left unprotected. Even masonry dust can be a real challenge and should be removed immediately. Protecting the frames from these various elements may include plastic sheets, silicone and lubricant sprays and plastic tape (Kling-Tite) to cover items such as door and window frames and sills.
Stacks Image 34232
Metal frames are generally corrosion resistant if anodized and properly sealed or painted with baked-on fluoropolymer paint but they are often subject to deterioration of the coating and corrosion of aluminum in severe (industrial, coastal) environments and galvanic corrosion from contact with dissimilar metals. Frame corner seals constructed using sealant are prone to disconnect from prolonged contact with moisture and from thermal and structural movements.
Another element of frames to be aware of is dissimilar metal corrosion. Dissimilar metal corrosion is an electrochemical process that destroys metal, reducing its thickness and strength. This corrosive reaction happens when these dissimilar materials are brought together in the presence of a catalyst. Dissimilar metals such as steel and aluminum are most prone to corrosion, in fact steel and aluminum react or corrode when they come in contact with each other. A great tip is to never use steel fasteners in aluminum framed doors or windows.
Available Sizes

Sizes

3/4" x 25'

Rolls/Case

4

Lbs./Case

1

Cases/Pallet

48

Customizable Sizes Available

Energy Triple Seal seal is better than Protecto Energy Sill Sealer or Triple Guard Energy Sill Sealer. Seals off three adhesive membrane areas and stops infiltration from framing and foundation, sill plate, mud sill and other interfaces. The only true self-adhesive air and moisture sill barrier with a cross-linked gasket.

Wic-Dri Window Moisture Management

“Adds a Nailing Flange to Any Door or Window”

Stacks Image 541744
$36.99

Allows Moisture Out, Not Back In
Seals Bottom Window Flange &
Stops Air From Blowing In
Supports Window Warranty

More Details..
Wic-Dri™ is a new product in building materials that is mold and mildew resistant, helps prevents black mold and fungus, mildew,  rot and decay, also acts as a  air stop, in window installations.  

Wrapid Pan - Door Pan System

Door Depths Standard 4 9/16”

Stacks Image 545475
$18.98

Caulk-Free System
Installs in Less than 5 Minutes
Flexible Pan Conforms for Perfect Fit
Does Not Change the Rough Opening

More Details..
Stacks Image 4927

DOOR

Stacks Image 4929
Product Description
Stacks Image 4938
Wrapid Pan™ Door is a patent pending door drainage pan system that allows moisture to drain freely away from the structure. This easy to install system is made in roll form using high-density PVC that can fit any size window or door system. Wrapid Pan is the most versatile, cost effective and easiest pan system to install.

Wrapid Pan™ Door kit comes with
TresTite Threshold Sealer acts as a gasket to lock out air infiltration underneath the threshold. This product is manufactured with a Micro-Grab™ self-adhering flange that provides a permanent seal that can be installed in most weather conditions.
Basic Uses
This waterproof tape can be used on new or existing construction for fenestration products such as patio doors, entrance doors, windows and skylights as a flashing-waterproof material. Can be used as a patch material on house wrap.
Features
  • Installs in Less than 5 Minutes
  • Comes in Kit Form for Easy Installation
  • Does Not Require or Depend on Caulk or Fastners
  • Does Not alter Rough Opening Size
  • 100% Air and Moisture Barrier
  • Backdam for Positive Front Flow
  • Easy to Shim or Insulate under Door
  • Adjustable to Fit any Size
  • Front Face Protection
  • Conforms to Surfaces Irregularities
  • Adheres at - 30º F
  • No Primer Required
  • No Drool or Staining
  • Workable for Precise Placement
  • Thin Design for Better Formability
  • Compatible with All Building Materials
  • No Heated Storage Required
  • Helps Stop Energy Loss
  • Helps Stop Mold and Mildew
  • 5 year Shelf Life
  • Environmentally Friendly with NO VOCs
  • Made in USA
Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.

How to Prevent Door Leaks ?

All doors will leak under enough pressure. The question is where does the water go when it leaks and how can you prevent damage.
Stacks Image 6324
Water infiltration that enters into structural framing of a building will cause rot, decay and mold. The key is having a plan to move the water out. The plan is using a pan - Wrapid Pan. The water gets in, Wrapid Pan get rid of it safely.
Stacks Image 33606
Unlike other pan systems that require caulking in order to make the system work, absolutely no caulking is required with Wrapid Pan. We believe that after decades of hands-on experience in the construction industry, anytime caulk had to be used to make a system work, that system was failed from the start. Wrapid Pan has the flexibility to fit any window or door opening without changing the rough opening size. This system is so convenient, the materials to complete a patio door can fit in a shoebox and can be installed with one tool.
Stacks Image 4177
Stacks Image 4174
Stacks Image 5180
The construction industry has been hit hard by millions of dollars on callbacks and claims because of leaking doors and windows. Poor design, poor installation and inadequate products can all be blamed for these issues. Due to these issues, it is imperative to have a “Moisture Management System.”

A big part of this Moisture Management System is having a pan system that works. A pan flashing is an element installed below every window and door designed to collect and direct any water that may leak through or around the opening back out to the exterior. As such, the sealing of the window or door assemblies into the rough opening should be made at the jamb and head of the window, however the sill should be left free to drain to the exterior.

Experts agree that there are 4 essential characteristics of pan flashing.
1. The pan flashing surface must be durable and provide a continuous water barrier without holes.
2. The pan flashing must have a back dam or positive slope to direct water to the outside of the wall.
3. The pan flashing must have has end dams at the sides to prevent water from moving laterally into the wall.
4. The pan flashing must have laps over the drainage plane beneath the opening.

Weather-Bloc says there is a 5th essential characteristic that may be the most important.
5. The pan flashing should not rely on caulk to keep it waterproof.

Wrapid Pan provides all five essential characteristics and has been tested and shown to offer the best protection and Moisture Management System on the market. The graph below is a water penetration test performed at API testing lab. Wrapid Pan not only passed the Residential requirements, it went over the cap for the US and Canada. Wrapid Pan simply achieved superior results.
Stacks Image 6856
Available Sizes

Length of Kit

6'

25'

100"

Door Depth*

A or B

A or B

A or B

Lbs./Case

6

3

12

Cases/Pa