Stacks Image 41942

Energy Triple Seal

“Seals #1 Area for Energy Loss”

Stacks Image 31200
$54.97

1 Kit contains:
25’ of Energy Sill Gasket &
25’ of 6” Max Shield Tape

Blocks Air/Moisture Infiltration At Joint
Reduces Heating and Cooling Costs

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Triple Seal Energy Sill Sealeris the combination of the gasket seal of ENERGY SILL SEAL and the air & moisture barrier protection of MAX-SHIELD. This unification of products gives you the ultimate protection from air & moisture infiltration that can deplete your building of up to 40% of its energy efficiency. 3X sealing provides three adhesive membrane areas for maximum protection.
Energy Sill Seal is a permanent gasket seal designed to eliminate air and moisture from entering between the foundation and the floor deck. Made from closed cell cross-linked polyethylene, Energy Sill Seal has the ability to compress and re-adjust for a permanent perfect fit during construction and when the building settles or moves.

Max-Shield™Perimeter Sill Flashing is made with an extremely durable puncture resistant facer that has over 500% elongation. It offers 100% protection from both air & moisture infiltration and has the ability to expand and contract with extreme substrate movement assuring a permanent long term water tight seal.
Basic Uses
Designed to seal up the most crucial area in a building, the interface between a floor deck/mud sill and top of the foundation.
Features
• Full plate seal, not just internal edge
• Stops moisture and air infiltration at joint
• Separates and provides a thermal break
• Adheres to damp, wet and cold surfaces
• Peel and stick for easy install
• Maintains a permanent seal
• Crossed Linked for Anti-Crush Properties
• Reduces Heating and Cool Costs
• Prevents harmful Garage Fumes from Entering
• Exceeds Local and National Codes
• Help Stop Mold and Mildew
• No Primer Required
• Widest Range of Installation Temperatures
• Workable for Precise Placement
• Compatible with All Building Materials
• Prevents Air and Moisture Infiltration
• Strongest Tape on the Market
• Moves With Joint Expansion and Contraction
• Conforms to Surfaces Irregularities
• Stays Flexible Forever
• Peel and Stick Installation
• Stops Energy Loss
• Stops Bugs from Entering at Joint
Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.
Available Sizes

Sizes

75 Lin. Ft.

Kits/Case

6

Lbs./Case

28

Cases/Pallet

48

Customizable Sizes Available

Box Sill Energy Loss at the Plate Line

Considered the most crucial area to seal up in a building is the interface between a floor deck/mud sill and top of the foundation - the box sill area. Test studies through the United States Department of Energy at Oakridge Laboratories have shown that a building can lose up to 40% of its total energy efficiency through air leakage if not properly sealed.
Seal Box Sill
The photo above using scientific instrumentation energy loss at the box sill area. The dark orange color represents the highest loss. Reducing the amount of air that leaks in and out of the box sill area is a cost-effective way to cut heating and cooling costs, improve durability, increase comfort, and create a healthier indoor environment. No other product maximizes a buildings energy efficiency more cost effectively than Triple Seal Energy Sill Sealer™ by Weather-Bloc.
Stacks Image 5136
Stacks Image 5174
Stacks Image 5180
Building air leakage is known as infiltration, which is introduction of outside air into a building, via gaps, cracks, door, windows or other unplanned openings. Whenever there is infiltration, there is corresponding exfiltration elsewhere in the building. In winter, air infiltration can result in warm, moist indoor air moving into cold envelope cavities.Air infiltration can cause condensation to occur in the structure, resulting in mold, decay and rot. Infiltration is usually caused by wind, "the stack effect", and/or mechanical equipment in the structure.
Stacks Image 5186
Wind creates a positive pressure on the windward face. On the opposite side of the building, negative pressure is created which pulls the air out of the building. Wind causes infiltration on one side of a building and exfiltration on the other.
The “stack effect” is when warm air moves upward in a building. This happens in summer and winter, but is most pronounced in the winter because indoor-outdoor temperature differences are the greatest. Warm air rises because it’s lighter than cold air. So when indoor air is warmer than the outdoor air, it escapes out of the upper levels of the building, through open windows, ventilation openings, or penetrations and cracks in the building envelope. The rising warm air reduces the pressure in the base of the building, forcing cold air to infiltrate through open doors, windows, or other openings. The stack effect basically causes air infiltration on the lower portion of a building and exfiltration on the upper part.

Mechanical equipment such as fans and blowers causes the movement of air within buildings and through enclosures, which can generate pressure differences. If more air is exhausted from a building than is supplied, a net negative pressure is generated, which can induce unwanted airflow through the building envelope. Bathroom exhaust fans, clothes dryers, built-in vacuum cleaners, dust collection systems, and range hoods all exhaust air from a building. This creates a negative pressure inside the building. If the enclosure is airtight or the exhaust flow rate high, large negative pressures can be generated.

Plugging crack or opening in a building is critical to a building performance in regards to energy usage and long-term durability. Creating a better balanced building envelope systems can play a important roll in health and safety of its occupants. Reduction in air infiltration can reduce harmful mold, have fewer drafts and can create better performance from ventilation systems.

Weather-Bloc's Triple Seal Energy Sill Sealer is the world's most advanced solution to the "box sill/ plate line" dilemma. Almost 100% of all buildings being built today use a non-crossed linked foam as a sill sealer. This type of foam was never designed as a gasket and can not seal long-term. Non-Crossed linked foams collapse once weight is applied on it, similar to bubble wrap. When the building dries out and the lumber framing and concrete foundation shrinks, large voids are left behind for both air and moisture to infiltrate.

Stacks Image 5787
Weather-Bloc Systems is the first company that offers a gasket sill sealer and for added protection from abnormal shrinkage and voids we developed Max-Shield a peel & stick perimeter sill flashing that gets applied once the floor deck is in place to assure a precise location and accurate installation. This winning combination has been shown to reduce Utility costs by over 35%.
Energy Triple Seal seal is better than Protecto Energy Sill Sealer or Triple Guard Energy Sill Sealer. Seals off three adhesive membrane areas and stops infiltration from framing and foundation, sill plate, mud sill and other interfaces. The only true self-adhesive air and moisture sill barrier with a cross-linked gasket.

Energy Plate Sealer

“Avoid Trapped Moisture Under Wall Plates”

Stacks Image 67120
$34.97

Seal Entire Plate, More Effective Than Caulk
Reduces Energy Costs
Conforms To Irregular Wood

More Details..

Energy Sill Sealer

“Designed to be the Best Sill Sealer”

Stacks Image 66899
$39.97

Weather Stripping Gasket
Cross-Linked foam With Rebound Memory
Provides a Thermal Break
Peel and Stick For Fast Installation

More Details..

Energy Slab Seal

“Must Have for Slab Construction”

Stacks Image 66977
$37.97

Seals Even Uneven Concrete
Provides a Effective Thermal Break
Anti-Crush, Cross Linked Foam

More Details..

Frame Guard

“Perfect Frame Protection for Doors”

Stacks Image 60808
$12.97

Protects Door Frames From Mortar
Separates Unlike Building Materials
Insulates Around Frame
Can Be Caulked

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Frame Guard™ is a protective gasket seal designed to separate window or door frames from incompatible materials. Frame Guard helps prevent damage to any claded window or door from corrosion and decolorizing from Stucco, Mortar, Cement and Acid based chemicals. This extremely cost effective product is made from closed cell cross-linked polyethylene and uses Weather Bloc's peel and stick MicroGrabTM Adhesive Technology that allows adhesion in extreme cold and wet weather.
Basic Uses
Works to protect the frame of doors or window. Anywhere a Thermal break or separation is needed.
Features
Stop corrosion to the frame
Separates acids-based products from cladding
Helps prevent staining and oxidation
Creates a seal around frame
Adheres to damp, wet and cold surfaces
Peel and stick for easy install
• Separates and provides a thermal break
• Maintains a permanent seal
• Crossed Linked for Anti-Crush Properties
• Use as Backer Rod to Caulk
• No Primer Required
• Widest Range of Installation Temperatures
• Workable for Precise Placement
• Moves With Joint Expansion and Contraction
• Conforms to Surfaces Irregularities
• Stays Flexible Forever
• Peel and Stick Installation
• Stops Energy Loss
• Stops Bugs from Entering at Joint
• 5 year Shelf Life
• Environmentally Friendly with NO VOCs
• Made in USA
Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.

Protect and Separate Door Frames

Architectural aluminum is widely used for window and door frames because it is attractive, durable, and requires little maintenance. However, unprotected aluminum interacts with cement-based materials, resulting in severe frame damage. IT is important to protect Metal window and door frames and Frame Guard is one way to help.
Seal Box Sill
Stacks Image 34227
Stacks Image 34224
Stacks Image 5180
Damage to Window and Door frames often occur during the handling and installation. When masonry products, such as concrete, mortar or plaster come in contact with the metal frame due to run-down, splattering or splashing, serious corrosion problems can occur to the frames. Even after the units are installed, construction like brickwork or roofing can cause additional problems if the units are left unprotected. Even masonry dust can be a real challenge and should be removed immediately. Protecting the frames from these various elements may include plastic sheets, silicone and lubricant sprays and plastic tape (Kling-Tite) to cover items such as door and window frames and sills.
Stacks Image 34232
Metal frames are generally corrosion resistant if anodized and properly sealed or painted with baked-on fluoropolymer paint but they are often subject to deterioration of the coating and corrosion of aluminum in severe (industrial, coastal) environments and galvanic corrosion from contact with dissimilar metals. Frame corner seals constructed using sealant are prone to disconnect from prolonged contact with moisture and from thermal and structural movements.
Another element of frames to be aware of is dissimilar metal corrosion. Dissimilar metal corrosion is an electrochemical process that destroys metal, reducing its thickness and strength. This corrosive reaction happens when these dissimilar materials are brought together in the presence of a catalyst. Dissimilar metals such as steel and aluminum are most prone to corrosion, in fact steel and aluminum react or corrode when they come in contact with each other. A great tip is to never use steel fasteners in aluminum framed doors or windows.
Available Sizes

Sizes

3/4" x 25'

Rolls/Case

4

Lbs./Case

1

Cases/Pallet

48

Customizable Sizes Available

Energy Triple Seal seal is better than Protecto Energy Sill Sealer or Triple Guard Energy Sill Sealer. Seals off three adhesive membrane areas and stops infiltration from framing and foundation, sill plate, mud sill and other interfaces. The only true self-adhesive air and moisture sill barrier with a cross-linked gasket.

MaX-Shield Perimeter Sill Flash

“Avoid Trapped Moisture Under Wall Plates”

Stacks Image 32095
$36.97

Seal Joints from Air & Moisture Infiltration
Conforms to Irregular Surfaces
Peel and Stick Application

More Details..
Availability and Sizes
Max Shield is a new product in energy solutions/ building materials used in construction that is a air barrier and water seal that helps prevent mold, mildew, rot and decay, reduces utility cost, improves energy efficiency

ThresTite Threshold Barrier

“Seals Those Leaking Door thresholds Permanently”

Stacks Image 66717
$9.99

Stops Air & Moisture Entering Threshold
Prevents Threshold Warping & Racking
Helps Protect Finished Floors
Reduces Energy Costs

More Details..
Availability and Sizes
Availability and Sizes
Product Description
ThresTite™ Door Threshold Gasket System is a permanent gasket seal designed to eliminate air and moisture from entering slab-on-grade door thresholds. Made from closed cell cross-linked polyethylene, ThresTite has the ability to compress and re-adjust for a permanent perfect fit during construction and when the building settles or moves. This peel and stick product uses Weather Bloc's high performance MicroGrabTM Adhesive Technology that allows adhesion in extreme cold and wet weather.


Seal Those Leaky Doors - Permanently!
One of the largest consumer complaints in construction is drafty doors. Air getting through the threshold and causing discomfort is that major cause for customer dissatisfaction. For years, contractors have used caulk as hopeful solution but it has failed miserably.
This infrared scan illustrates the amount of heat loss at the threshold of this door. This not only causes drafts but cost 100's of dollars every year in energy loss.
Features
• Dramatically More Effective than Caulking
• Protects Finished Floors & Structural Framing
• Prevents Warping and Racking
• Reduces Energy Costs
• Conforms to Irregular Concrete
• Rebound Recovery Formulation
• Peel and Stick Installation
• Helps Reduce and Deaden Sound
• Maintains a Permanent Seal
• Less Expensive than Caulking
• No Primer Required
• Widest Range of Installation Temperatures
• Workable for Precise Placement
• Compatible with All Building Materials
• Lifetime Limited Warranty*

Basic Uses
Additional Benefits
Can be used under door thresholds with slab-on-grade or wood construction. This product can be used anywhere a gasket is needed.  
Easy Start Peel and Stick™permits a quicker release of the backer that provides faster installation.
By examining thresholds from different door manufactures, one will notice that they are extremely difficult to caulk. The other factor is the unevenness of the concrete and stiffness of the threshold making the sealing uneven as well. The real long-term solution is Weather-Bloc's ThresTite gasket. With Peel and stick for waterproofing and cross-linked polyethylene for that rebounding type memory foam give ThresTite a permanent threshold seal.
ThresTite™
Caulked
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Can be installed successfully at temperature as low as -30° F.
By not allowing air and moisture to enter into the building envelope, one can save up to 50% on utility cost.
Can be installed successfully at temperature as low as -30° F.
Our special Micro-Grab Technolgy allows the adhesive to adhere in wet conditions. Testing has shown that it can even be installed under water.
Crossed linked to provide elongation with recovery properties.
Made with Pride in the United State of America.
Designed and manufactured with environmental awareness this product has No VOCs and is earth friendly.
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including cold and wet weather adhesion.
A five year shelf life gives contractors and distributors the opportunities to buy in large volumes and reduce costs.
Availability and Sizes
ThresTite™ is a new product in building materials that acts as a air stop, blocks water infiltration,  helps prevents black mold, fungus, mildew and improves home energy efficiency, and cuts utility cost.

Truss-tite Energy Separator

“Thermal Break Reduces Energy Loss”

Stacks Image 66771
Stacks Image 66775
$8.99

Acts as a Thermal Break
Reduces or Eliminates Conductivity
Reduces Vibration and Sound

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Truss-tite™ is a gasket that is designed as a thermal break for roof trusses. Manufactured using a cross linked foam, this product has the ability to rebound. This product creates a thermal break that reduces the flow of energy between the top plate and the roof truss or other truss intersections.
Basic Uses
Designed to be used as a thermal break for metal or wood trusses. Maybe used as a thermal/vibration break in other applications.

Truss-tite could also be used as a Thermal breaks:
1) on the outside face of all external wall framing that forms part of the thermal envelope
2) between top plates and bottom truss chords or rafter/ceiling joists at external walls
3) between soffit bearers and the wall framing they are attached to
4) for skillion roofs, to the outside edge of the rafter or top truss chord as well as around the soffit framing.

Features
• Acts as a Thermal Break
• Separates Product and Possible Conductivity
• Can reduce Vibration or Sound Transmission
• Peel and Stick for Fast, Easy Installation
• Creates a Permanent Seal
• Adheres to Damp, Wet and Cold Surfaces
• Maintains a permanent seal
• Crossed Linked for Anti-Crush Properties
• Use as Backer Rod to Caulk
• No Primer Required
• Widest Range of Installation Temperatures
• Workable for Precise Placement
• Conforms to Surfaces Irregularities
• Stays Flexible Forever
• Peel and Stick Installation
• Helps Reduce Energy Loss
• 5 year Shelf Life
• Environmentally Friendly with NO VOCs
• Made in USA

Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.

Thermal Break Reduces Energy Loss

A thermal break or thermal barrier is an element of low thermal conductivity placed in an assembly to reduce or prevent the flow of thermal energy between conductive materials.
Seal Box Sill
Steel framing is highly conductive – it transmits heat very effectively. A house built with steel framing and no thermal breaks would lose a lot of heat to the outside. Even wood framing can lose heat to the outside. Truss-tite can help aid in the reduction of energy loss.
Stacks Image 34227
Stacks Image 34224
Available Sizes

Sizes

3/4" x 25'

1.5" x 25'

3.5” x 25'

Rolls/Case

4

4

4

Lbs./Case

1

1

2

Cases/Pallet

48

48

48

Customizable Sizes Available

Energy Triple Seal seal is better than Protecto Energy Sill Sealer or Triple Guard Energy Sill Sealer. Seals off three adhesive membrane areas and stops infiltration from framing and foundation, sill plate, mud sill and other interfaces. The only true self-adhesive air and moisture sill barrier with a cross-linked gasket.

Window Guard

“Protects Window Frames from Damage”

Stacks Image 66824
$12.97

Protects Window Frames From Mortar
Separates Unlike Building Materials
Insulates Around Frame
Can Be Caulked

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Window Guard™ is a protective gasket seal designed to separate window or door frames from incompatible materials. Window Guard helps prevent damage to any claded window or door from corrosion and decolorizing from Stucco, Mortar, Cement and Acid based chemicals. This extremely cost effective product is made from closed cell cross-linked polyethylene and uses Weather Bloc's peel and stick MicroGrabTM Adhesive Technology that allows adhesion in extreme cold and wet weather.
Basic Uses
Works to protect the frame of doors or window. Anywhere a Thermal break or separation is needed.
Features
Stop corrosion to the frame
Separates acids-based products from cladding
Helps prevent staining and oxidation
Creates a seal around frame
Adheres to damp, wet and cold surfaces
Peel and stick for easy install
• Separates and provides a thermal break
• Maintains a permanent seal
• Crossed Linked for Anti-Crush Properties
• Use as Backer Rod to Caulk
• No Primer Required
• Widest Range of Installation Temperatures
• Workable for Precise Placement
• Moves With Joint Expansion and Contraction
• Conforms to Surfaces Irregularities
• Stays Flexible Forever
• Peel and Stick Installation
• Stops Energy Loss
• Stops Bugs from Entering at Joint
• 5 year Shelf Life
• Environmentally Friendly with NO VOCs
• Made in USA
Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.

Protect and Separate Door Frames

Architectural aluminum is widely used for window and door frames because it is attractive, durable, and requires little maintenance. However, unprotected aluminum interacts with cement-based materials, resulting in severe frame damage. IT is important to protect Metal window and door frames and Window Guard is one way to help.
Stacks Image 34227
Stacks Image 34224
Stacks Image 5180
Damage to Window and Door frames often occur during the handling and installation. When masonry products, such as concrete, mortar or plaster come in contact with the metal frame due to run-down, splattering or splashing, serious corrosion problems can occur to the frames. Even after the units are installed, construction like brickwork or roofing can cause additional problems if the units are left unprotected. Even masonry dust can be a real challenge and should be removed immediately. Protecting the frames from these various elements may include plastic sheets, silicone and lubricant sprays and plastic tape (Kling-Tite) to cover items such as door and window frames and sills.
Stacks Image 34232
Metal frames are generally corrosion resistant if anodized and properly sealed or painted with baked-on fluoropolymer paint but they are often subject to deterioration of the coating and corrosion of aluminum in severe (industrial, coastal) environments and galvanic corrosion from contact with dissimilar metals. Frame corner seals constructed using sealant are prone to disconnect from prolonged contact with moisture and from thermal and structural movements.
Another element of frames to be aware of is dissimilar metal corrosion. Dissimilar metal corrosion is an electrochemical process that destroys metal, reducing its thickness and strength. This corrosive reaction happens when these dissimilar materials are brought together in the presence of a catalyst. Dissimilar metals such as steel and aluminum are most prone to corrosion, in fact steel and aluminum react or corrode when they come in contact with each other. A great tip is to never use steel fasteners in aluminum framed doors or windows.
Available Sizes

Sizes

3/4" x 25'

Rolls/Case

4

Lbs./Case

1

Cases/Pallet

48

Customizable Sizes Available

Energy Triple Seal seal is better than Protecto Energy Sill Sealer or Triple Guard Energy Sill Sealer. Seals off three adhesive membrane areas and stops infiltration from framing and foundation, sill plate, mud sill and other interfaces. The only true self-adhesive air and moisture sill barrier with a cross-linked gasket.

Brick Mould Seal

“Great Way to Seal Brick Moulding”

Stacks Image 60863
$25.94

Peel and Stick
Easy Install No Mess
Conforms to Irregular Surfaces
Seal Full 1.25” Width of Brick Mould

More Details..