Stacks Image 41942

Scuf-Tuf Wood Floor Protection

"Protection and Sticks Without Adhesives"

Stacks Image 29670
Stacks Image 29673
$42.49

No Tape or Fasteners Needed
Fast & Easy Installation
Just Roll and Press in Place

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Scuf-Tuf™ Wood Floor Protection is a special formulated film designed to bond to surfaces without the use of adhesive so no residue is left embedded in the floor.
Scuf-Tuf is safe for all surfaces and the easiest and most cost effective solution to protecting hardwood flooring from being damaged from heavy foot traffic, chairs/tables, excessive wear and tear.

Basic Uses
Anything that needs protection that it can cling to - Wall, Floors, Gym Floors, Tubs and Etc.

Reduces Damage

Stacks Image 32978
Using adhesive backed films on wood floors to protect the finish from getting damaged will not only ruin the finish but will leave adhesive residue imbedded into the wood grains damaging the finish which is extremely expensive to repair and refinish.

An Ounce of Prevention

Stacks Image 32043
You’ve made the investment in your flooring so what can you do to help ensure your flooring stays looking like new? Installing Scuf-Tuf is really a great way to protect the floor from high traffic events or even during construction.

Help protect floors when grit gets stuck to the bottom of shoes which can really scratch floors and ruin finishes.



Features
  • Safe for all surfaces to be protected
  • Bonds to surfaces with No Adhesive
  • Does not require mechanical fasteners or taping to keep it in place
  • No costly cleanup from sticky residue imbedded
  • Fast & easy installation, just press in place
  • Superior tear & puncture resistance to others
  • Non-skid surface and easy to clean
  • Commercial grade strength for wear resistance
  • Cost effective and labor saving
  • Can be applied to almost any clean dry wood surface
  • Re-Useable and 100% Recyclable
  • No VOCs and Environmentally Friendly
  • Limited Lifetime Warranty
  • Made in USA

Available Sizes

Sizes

24" x 300'

36" x 300'

Rolls/Case

1

1

Lbs./Case

5

7.5

Cases/Pallet

48

48

Customizable Sizes Available

Kling-Tite Super Surface Protection

“Surface Protection”

Stacks Image 29262
Stacks Image 31565
Stacks Image 118089
$42.49

No Tape or Fasteners Needed
Fast & Easy Installation, Just Press in Place
Non-Skid Surface and Easy to Clean
Works Great on Floors, Especially Wood

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Kling-Tite™ Super Surface Protection is a special formulated film that has the ability to cling to most surfaces securely without the use of adhesive. It is safe for all surfaces and once removed does not leave any residue behind to cleanup which in a lot of cases will require professional cleaning.

This is especially true when used in high traffic areas on carpet, vinyl or even ceramic tile where the residue gets imbedded into the grout itself. Adhesive films will also cause damage to the finish on hardwood flooring.
Basic Uses
Anything that needs protection that it can cling to - Wall, Floors, Carpets, Gym Floors, Tubs and Etc.
Features
  • Safe for all surfaces to be protected
  • Bonds to surfaces with No Adhesive
  • Does not require mechanical fasteners or taping to keep it in place
  • No costly cleanup from sticky residue imbedded
  • Fast & easy installation, just press in place
  • Superior tear & puncture resistance to others
  • Non-skid surface and easy to clean
  • Commercial grade strength for wear resistance
  • Cost effective and labor saving
  • Can be applied to almost any clean dry surface*
  • Re-Useable and 100% Recyclable
  • No VOCs and Environmentally Friendly
  • Limited Lifetime Warranty
  • Made in USA

* avoid high nap carpet

Sticks to Surface Without Adhesive, Leaving No Residue

Kling-Tite is the easiest and most cost effective solution to protecting surfaces from scrapes, scratches and wear and tear. It has superior puncture and tear resistance when compared to other surface protectors and offers Industrial grade durability.

The applications for Kling-Tite are endless. Whether you are protecting carpet and vinyl from high traffic areas, protecting appliances during moving or gymnasium floors when having social events to using it for taping off walls or floors when spray painting, no other product holds up better. Just roll it out on the surface to be protected and press in place, it is that easy.
Stacks Image 32043
The applications for Kling-Tite are endless. Whether you are protecting carpet and vinyl from high traffic areas, protecting appliances during moving or gymnasium floors when having social events to using it for taping off walls or floors when spray painting, no other product holds up better. Just roll it out on the surface to be protected and press in place, it is that easy.

Stacks Image 32981
Available Sizes

Sizes

24" x 300'

36" x 300'

Rolls/Case

1

1

Lbs./Case

5

7.5

Cases/Pallet

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

Truss-tite Energy Separator

“Thermal Break Reduces Energy Loss”

Stacks Image 29815
Stacks Image 29818
$8.99

Acts as a Thermal Break
Reduces or Eliminates Conductivity
Reduces Vibration and Sound

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Truss-tite™ is a gasket that is designed as a thermal break for roof trusses. Manufactured using a cross linked foam, this product has the ability to rebound. This product creates a thermal break that reduces the flow of energy between the top plate and the roof truss or other truss intersections.
Basic Uses
Designed to be used as a thermal break for metal or wood trusses. Maybe used as a thermal/vibration break in other applications.

Truss-tite could also be used as a Thermal breaks:
1) on the outside face of all external wall framing that forms part of the thermal envelope
2) between top plates and bottom truss chords or rafter/ceiling joists at external walls
3) between soffit bearers and the wall framing they are attached to
4) for skillion roofs, to the outside edge of the rafter or top truss chord as well as around the soffit framing.

Features
• Acts as a Thermal Break
• Separates Product and Possible Conductivity
• Can reduce Vibration or Sound Transmission
• Peel and Stick for Fast, Easy Installation
• Creates a Permanent Seal
• Adheres to Damp, Wet and Cold Surfaces
• Maintains a permanent seal
• Crossed Linked for Anti-Crush Properties
• Use as Backer Rod to Caulk
• No Primer Required
• Widest Range of Installation Temperatures
• Workable for Precise Placement
• Conforms to Surfaces Irregularities
• Stays Flexible Forever
• Peel and Stick Installation
• Helps Reduce Energy Loss
• 5 year Shelf Life
• Environmentally Friendly with NO VOCs
• Made in USA

Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.

Thermal Break Reduces Energy Loss

A thermal break or thermal barrier is an element of low thermal conductivity placed in an assembly to reduce or prevent the flow of thermal energy between conductive materials.
Seal Box Sill
Steel framing is highly conductive – it transmits heat very effectively. A house built with steel framing and no thermal breaks would lose a lot of heat to the outside. Even wood framing can lose heat to the outside. Truss-tite can help aid in the reduction of energy loss.
Stacks Image 34227
Stacks Image 34224
Available Sizes

Sizes

3/4" x 25'

1.5" x 25'

3.5” x 25'

Rolls/Case

4

4

4

Lbs./Case

1

1

2

Cases/Pallet

48

48

48

Customizable Sizes Available

Energy Triple Seal seal is better than Protecto Energy Sill Sealer or Triple Guard Energy Sill Sealer. Seals off three adhesive membrane areas and stops infiltration from framing and foundation, sill plate, mud sill and other interfaces. The only true self-adhesive air and moisture sill barrier with a cross-linked gasket.