Stacks Image 41942

Energy Triple Seal

“Seals #1 Area for Energy Loss”

Stacks Image 760570
$54.97

1 Kit contains:
25’ of Energy Sill Gasket &
25’ of 6” Max Shield Tape

Blocks Air/Moisture Infiltration At Joint
Reduces Heating and Cooling Costs

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
Triple Seal Energy Sill Sealeris the combination of the gasket seal of ENERGY SILL SEAL and the air & moisture barrier protection of MAX-SHIELD. This unification of products gives you the ultimate protection from air & moisture infiltration that can deplete your building of up to 40% of its energy efficiency. 3X sealing provides three adhesive membrane areas for maximum protection.
Energy Sill Seal is a permanent gasket seal designed to eliminate air and moisture from entering between the foundation and the floor deck. Made from closed cell cross-linked polyethylene, Energy Sill Seal has the ability to compress and re-adjust for a permanent perfect fit during construction and when the building settles or moves.

Max-Shield™Perimeter Sill Flashing is made with an extremely durable puncture resistant facer that has over 500% elongation. It offers 100% protection from both air & moisture infiltration and has the ability to expand and contract with extreme substrate movement assuring a permanent long term water tight seal.
Basic Uses
Designed to seal up the most crucial area in a building, the interface between a floor deck/mud sill and top of the foundation.
Features
• Full plate seal, not just internal edge
• Stops moisture and air infiltration at joint
• Separates and provides a thermal break
• Adheres to damp, wet and cold surfaces
• Peel and stick for easy install
• Maintains a permanent seal
• Crossed Linked for Anti-Crush Properties
• Reduces Heating and Cool Costs
• Prevents harmful Garage Fumes from Entering
• Exceeds Local and National Codes
• Help Stop Mold and Mildew
• No Primer Required
• Widest Range of Installation Temperatures
• Workable for Precise Placement
• Compatible with All Building Materials
• Prevents Air and Moisture Infiltration
• Strongest Tape on the Market
• Moves With Joint Expansion and Contraction
• Conforms to Surfaces Irregularities
• Stays Flexible Forever
• Peel and Stick Installation
• Stops Energy Loss
• Stops Bugs from Entering at Joint
Additional Features
Stacks Image 4979
Peel and Stick application for fast, accurate installation.
Stacks Image 4985
Able to withstand movement and still stay incredibly strong under the harshest conditions.
Stacks Image 4992
By not allowing air and moisture to enter into the building envelope, one can save on utility cost.
Stacks Image 4999
This product will stay Flexible Forever giving it the advantage of moving with the expansion and contraction of the building.
Stacks Image 5006
Crossed linked to provide elongation with recovery properties.
Stacks Image 5030
Can be installed successfully at temperature as low as -30° F.
Stacks Image 5037
Made with Pride in the
United State of America.
Stacks Image 5051
Designed and manufactured with environmental awareness, this product is VOC Complaint and earth friendly.
Stacks Image 5044
Micro-Grab Technology is the most advance adhesive in the world with vastly superior properties including hot, cold and wet weather adhesion.
Available Sizes

Sizes

75 Lin. Ft.

Kits/Case

6

Lbs./Case

28

Cases/Pallet

48

Customizable Sizes Available

Box Sill Energy Loss at the Plate Line

Considered the most crucial area to seal up in a building is the interface between a floor deck/mud sill and top of the foundation - the box sill area. Test studies through the United States Department of Energy at Oakridge Laboratories have shown that a building can lose up to 40% of its total energy efficiency through air leakage if not properly sealed.
Seal Box Sill
The photo above using scientific instrumentation energy loss at the box sill area. The dark orange color represents the highest loss. Reducing the amount of air that leaks in and out of the box sill area is a cost-effective way to cut heating and cooling costs, improve durability, increase comfort, and create a healthier indoor environment. No other product maximizes a buildings energy efficiency more cost effectively than Triple Seal Energy Sill Sealer™ by Weather-Bloc.
Stacks Image 5136
Stacks Image 5174
Stacks Image 5180
Building air leakage is known as infiltration, which is introduction of outside air into a building, via gaps, cracks, door, windows or other unplanned openings. Whenever there is infiltration, there is corresponding exfiltration elsewhere in the building. In winter, air infiltration can result in warm, moist indoor air moving into cold envelope cavities.Air infiltration can cause condensation to occur in the structure, resulting in mold, decay and rot. Infiltration is usually caused by wind, "the stack effect", and/or mechanical equipment in the structure.
Stacks Image 5186
Wind creates a positive pressure on the windward face. On the opposite side of the building, negative pressure is created which pulls the air out of the building. Wind causes infiltration on one side of a building and exfiltration on the other.
The “stack effect” is when warm air moves upward in a building. This happens in summer and winter, but is most pronounced in the winter because indoor-outdoor temperature differences are the greatest. Warm air rises because it’s lighter than cold air. So when indoor air is warmer than the outdoor air, it escapes out of the upper levels of the building, through open windows, ventilation openings, or penetrations and cracks in the building envelope. The rising warm air reduces the pressure in the base of the building, forcing cold air to infiltrate through open doors, windows, or other openings. The stack effect basically causes air infiltration on the lower portion of a building and exfiltration on the upper part.

Mechanical equipment such as fans and blowers causes the movement of air within buildings and through enclosures, which can generate pressure differences. If more air is exhausted from a building than is supplied, a net negative pressure is generated, which can induce unwanted airflow through the building envelope. Bathroom exhaust fans, clothes dryers, built-in vacuum cleaners, dust collection systems, and range hoods all exhaust air from a building. This creates a negative pressure inside the building. If the enclosure is airtight or the exhaust flow rate high, large negative pressures can be generated.

Plugging crack or opening in a building is critical to a building performance in regards to energy usage and long-term durability. Creating a better balanced building envelope systems can play a important roll in health and safety of its occupants. Reduction in air infiltration can reduce harmful mold, have fewer drafts and can create better performance from ventilation systems.

Weather-Bloc's Triple Seal Energy Sill Sealer is the world's most advanced solution to the "box sill/ plate line" dilemma. Almost 100% of all buildings being built today use a non-crossed linked foam as a sill sealer. This type of foam was never designed as a gasket and can not seal long-term. Non-Crossed linked foams collapse once weight is applied on it, similar to bubble wrap. When the building dries out and the lumber framing and concrete foundation shrinks, large voids are left behind for both air and moisture to infiltrate.

Stacks Image 5787
Weather-Bloc Systems is the first company that offers a gasket sill sealer and for added protection from abnormal shrinkage and voids we developed Max-Shield a peel & stick perimeter sill flashing that gets applied once the floor deck is in place to assure a precise location and accurate installation. This winning combination has been shown to reduce Utility costs by over 35%.
Energy Triple Seal seal is better than Protecto Energy Sill Sealer or Triple Guard Energy Sill Sealer. Seals off three adhesive membrane areas and stops infiltration from framing and foundation, sill plate, mud sill and other interfaces. The only true self-adhesive air and moisture sill barrier with a cross-linked gasket.

BramGuard Thru-Wall Flashing

“No Droll, All Weather Tape”

Stacks Image 66545
$33.98

100% Air and Moisture Barrier
Twice as Strong as Other Tapes
Peel and Stick Application
No Drooling or Staining

More Details..
Stacks Image 33273

Through Wall Flashing

Stacks Image 4929
Product Description
Stacks Image 4938
WaterStop™ Through Wall Flashing is a extremely durable peel and stick membrane that aggressively bonds to wood, concrete or block in harsh weather conditions. Designed to be 100% waterproof and creates an impervious barrier for water to exit to the face of the exterior finish. This easy to form membrane works well with cants, bump-outs or other features. Manufactured with MicroGrab™ Adhesive Technology this tape can can withstand the expansion and contraction of manor walls.
Stacks Image 4177
Stacks Image 4174
Basic Uses
This waterproof peel and stick flashing tape can be used for masonry through wall flashing or where non-exposed waterproofing is needed.

Diverts Moisture from Masonry Walls

Stacks Image 32043
Through-wall flashing is used to divert moisture, which has entered the wall, to the outside, before it can cause damage. This flashing method is considered the most effective method of preventing leaks.
Features
  • For Residential or Commercial Use
  • Peel and Stick
  • 100% Air and Moisture Barrier
  • Twice as Strong as Other Tapes
  • Seals around nails
  • Adheres at - 30º F
  • Stays Elastic, Does Not Oxidize or Dry Out
  • No Drool or Staining
  • Widest Range of Installation Temperatures
  • Available in 3 Widths
  • Workable for Precise Placement
  • Thin Design for Better Formability
  • No Heated Storage Required
  • Conforms to Surfaces Irregularities
  • Compatible with Most Building Materials
  • Helps Stop Mold and Mildew
  • No VOCs and Environmentally Friendly
  • Micro-Grab Adhesive Technology
  • 5 year Shelf Life
  • Limited Lifetime Warranty
  • Made in USA
Available Sizes

Sizes

12" x 75'

18" x 75'

24" x 75'

Rolls/Case

4

4

4

Lbs./Case

26

35

52

Cases/Pallet

48

24

24

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

XpanX Concrete

“Best Concrete Expansion Joint”

Stops Radon Gas
$23.49

Prevents Radon Gas
Non Collapsing
Stops Energy Loss
Peel & Stick Application

WaterStop Transition Boot

“Protects The Footings”

Footing Protection that stops water
$33.98

Protect Footing
Stops Water at Joint
Peel and Stick Application
Prevents Cracking from Moisture

More Details..

[Product Information] [Sales Literature] [Installation Instructions] [Technical Specifications] [MSDS]

Stacks Image 35548

Transition Boot

Stacks Image 35553
Product Description
Stacks Image 4938
WaterStop™ Transition Boot is a peel and stick membrane that helps seal off the moisture migration through the foundation wall and footing assembly. Designed with MicroGrab™Adhesive Technology this tape can be installed to most building materials in cold and wet conditions. WaterStop Transition Boot is an extremely strong membrane and can withstand the expansion and contraction of dissimilar products. This tape can create a 100% waterproof joint.
Stacks Image 35574
Stacks Image 35571
Basic Uses
Waterproofing below grade such as transitions, boots, patches or other areas that require waterproofing.

Stacks Image 35737

Give Water The Transition Boot

Reducing foundation leaks start at the top with good surface water control moving the water away from the structure. However, high water tables, clogged drains, heavy rains or flooding can create water pressure that can push water where we would prefer it not to go - between the footer and foundation wall interface.
Stacks Image 35732
Soil that is backfilled against the walls of a foundation will always be uncompressed or looser and more permeable than the “virgin” soil due to the upheaval by the excavation process.

Higher permeability means that water will naturally collect against the foundation wall. Even with exterior foundation drains water under pressure can get between the footing and the wall and create serious problems. The use of Weather-Bloc’s WaterStop Transition Boot can help water infiltration at foundation-footing interface.

Protect Your Footings

Features
• Superior Bonding to Most Surfaces
• Helps Eliminate Cracks and Heaving
• Adheres in Cold Weather -30ºF
• Helps Maintain Water Drainage
• Backfill Durable Membrane
• Provides Full Capillary Break
• Stops Infiltration of Soil Gasses
• Helps Prevent Wall Failure
• Available in 3 Widths
• Workable for Precise Placement
• Thin Design for Better Formability
• No Heated Storage Required
• Conforms to Surfaces Irregularities
• Compatible with Most Building Materials
• Helps Stop Mold and Mildew
• No VOCs and Environmentally Friendly
• Micro-Grab Adhesive Technology
• Works on Wood Foundations as Well
• Limited Lifetime Warranty
• Made in USA

Available Sizes

Sizes

6" x 75'

9" x 75'

12" x 75'

Rolls/Case

8

4

4

Lbs./Case

26

16

26

Cases/Pallet

48

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

Joint Loc Sealant

"Seals Joints Up To 1" Wide"

Stacks Image 65323
Stacks Image 65326
$8.99

Superior Adhesion and Stays Flexible
Bonds in Wet and Cold Conditions
Water-Based Paintable
USDA and FDA Approved

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
JointLoc™ uses an advanced formula of superior polymer technology. This industrial strength sealant provides superior adhesion even in wet and freezing conditions. Pro-Formula was specially formulated to bond without a primer to most construction materials including fiber-cement, EPS, wood, metal, vinyl, concrete, aluminum and brick. This permanent sealant remains flexible and blocks out moisture and air infiltration. Guaranteed to never crack, peel or separate, JointLoc outperforms polyurethanes, silicones, tripolymers and other sealants.
Basic Uses
Can be used on projections, pipes, vents, termination bars, field seams, butt joints, fish mouths, pitch pans, soil stacks and wall joints.
Stacks Image 33636
Features
• Bonds in Wet, Freezing Temperatures
• Superior Adhesion
• Water-based for Easy Clean Up
• Fills Gaps up to 1" Wide
• Paintable
• Compatible with EPS/XPS Foam
• Odor free with VOC Compliant
• 98% Solids
• USDA and FDA approved
• No Primer Required
• Interior or Exterior Use
• Lifetime Seal
• Made in the USA

Coverage
A 10 fl oz cartridge will extrude approx. 30.6 ft of a 1/4” (6 mm) bead. A 10 fl oz cartridge will extrude approx. 13.6 ft of a 3/8” bead.
Available Sizes

Sizes

10.1 oz

Tubes/Case

12

Lbs./Case

12

Cases/Pallet

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

MaX-Shield Perimeter Sill Flash

“Avoid Trapped Moisture Under Wall Plates”

Stacks Image 760605
$36.97

Seal Joints from Air & Moisture Infiltration
Conforms to Irregular Surfaces
Peel and Stick Application

More Details..
Availability and Sizes
Max Shield is a new product in energy solutions/ building materials used in construction that is a air barrier and water seal that helps prevent mold, mildew, rot and decay, reduces utility cost, improves energy efficiency

Chalk-Loc Concrete Sealant

“The Mini Size in Waterproofing Protection”

Stacks Image 65536
Stacks Image 65539
$199.99

Stops Concrete From Chalking
Fast Dry Time, One Coat
Non-Toxic and Odorless
Preps Concrete for Latex Paints

More Details..

WateRepel Sealer

“Clear Sealer For Almost Anything“

Best waterproofer for wood concrete and masonry
$59.95

Seals & Protect Wood/Masonry
Dries Transparent, Can be Painted
Excellent Coverage Fast Curing
Leaves No Tacky Surface

More Details..
Stacks Image 4927
Stacks Image 4929
Product Description
Stacks Image 4938
WateRepel™ is a special formulated clear water base sealer designed to offer long-term waterproofing protection. WateRepel is a silicone/silane transparent waterproofing sealer and provides superior protection from wind driven rain on almost all porous masonry surfaces.

WateRepel is fast drying, leaves no tacky finish, provides a low cost application and produces a water repellent surface without staining or significantly changing the color of the concrete or masonry surface. It requires no special tools to apply, can be sprayed, rolled or brushed on.
Basic Uses
Seals and protects lumber.
Stacks Image 34647
Features
• Seals and Protects Wood
• Dries Transparent and Can be Painted
• Excellent Coverage and Fast curing
• Leaves NO Tacky Surface
• Only Requires one Application
• Designed for all Masonry surfaces
• Performs in Extreme Weather Conditions
• Gives Excellent Protection from Wind Driven Rain

Coverage
200 square feet per gallon.
Available Sizes

Sizes

1 Gal

Units/Case

1

Lbs./Case

10

Cases/Pallet

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.

DriMax Waterproofer

"Seal Masonry Even From Wind Driven Rain"

Stacks Image 65179
Stacks Image 65217
$49.95

Dries Transparent and Can Be Painted
Excellent Coverage and Fast Curing
Excellent Protection From Wind Driven Rain

Lithifier Masonry Densifier

“Deepest Penetrating Hardening Sealer”

Stacks Image 65733
$299.99

Seals Concrete
Penetrates Concrete up to 7" Deep
Helps Reduce Musty Basement Smells

More Details..
Stacks Image 35047
Stacks Image 4929
Product Description
Stacks Image 4938
Lithifier™ is the deepest penetrating concrete sealer/waterproofing product on the market. It has shown to penetrate up to 7” in concrete. Lithifier has been designed to make concrete virtually impermeable and still allows the concrete to breath. The molecular structure is made up of sphere shape microscopic ball bearings allowing it to fill the tiny capillaries preventing water, efflorescence and other contaminants from migrating to the surface.
Stacks Image 35354
Basic Uses
Concrete Flat work where sealing is important: Raw Concrete Floors: Basements: Indoor Concrete

Harden and Seal Concrete

Stacks Image 32043
Concrete is a vary porous material that expands and contracts with moisture and temperature changes. Left untreated, concrete can start to dust, wear and lose strength and eventually start cracking. Applying Lithifier™ Masonry Densifier to concrete fills in those porous pores and increasing surface density.
When new concrete starts the curing process, excess water rises to the surface making it much softer than the slab's core. It also increases the water to cement ratio, which further weakens the surface. Lithifier address this problem by binding to available lime in a pozzolanic fashion, creating additional cementitious material and strengthening the surface.

Reduce Your Concrete Repairs

Features
• For Residential or Commercial Use
• Seals Concrete up to 7" Deep
• Aids in Blocking Efflorescence
• Breathable, Impermeable and Clear
• Internal Foundation Waterproofing
• Protects Against Spalling and Cracking
• Helps Create Healthier Environment
• Protects from Wind Driven Rain
• Excellent Coverage
• Limited Lifetime Warranty
• Made in USA

Available Sizes

Sizes

1 Gallon

5 Gallon

Units/Case

4

1

Lbs./Case

12

50

Cases/Pallet

48

48

Customizable Sizes Available

We believe that Xtreme Weather Flashing tape is the best on the market. We believe it is better than all others flashing tapes including 3M 8067, DuPont Tyvek Tape, Nashua Select, Protecto Super Stick, Grace Vycor Plus, Protecto Wrap Bt-25XI, Henkel OSI TeQ Flash, Windowwrap PSX-20, MFM WindowWrap PowerBond, Henry Blueskin WB, barricade Ulti-Flash, Mpn 45804, Nashua Optiflash, Polyguard, York RESHS09, Shadowlastic, Baricade, Aquaseal Hyband, Adchem DrainFlash and Typar Flashing.
Stacks Image 760214

Insul-Guard Foundation Composite

"Protect and Dress Up Your Foundation Insulation"

Stacks Image 760232
Stacks Image 760235
$82.25
Concrete Gray Color

WaterProof and UV Resistant
Super Durable Composite Material
Impact Resistant
Non-Corrosive, Non-Conductive

More Details..
Stacks Image 27666
Foundation Insulation Protection System
Stacks Image 27102

Insul-Guard

Designed to give protection and finish the top of the exposed foundation insulation.

Stacks Image 28681

Roll Size Availability
12” Wide x 50’ Long
16” Wide x 50’ Long
24” Wide x 50’ Long

Other Sizes Availability
4’ x 8’

Stacks Image 28698
Protection Your Foundation
High Impact Resistant
Protection:
Back Filling
Bugs and Pests
Weed trimmers and mower debris
100% Waterproof
Prevents:
Mold or mildew
Structural framing damage
Sill plate leakage

Enhance Curb Appeal
Promotes:
Clean look
Professional finish
Value

Insul-Guard System Advantages

  • default_titleImpact Resistant
  • default_title100% Waterproof
  • default_titleMold Resistant
  • default_titleUV Protection
  • default_titleSimple Installation
  • default_titleEasy to Clean
  • Show More
  • default_titleWill Not Buckle
  • default_titleWill Not Ripple
  • default_titleNon-Conductive
  • default_titleNo VOCs
  • default_titleMade in USA
  • default_titleLifetime Limited Warranty
  • Show More
  • default_titleHelps Prevent Pests
  • default_titleReduces Utility Costs
  • default_titleThickness Adjustability
  • default_titleEast to Cut
  • default_titleLightweight for Transport
  • default_titleWill Not Corrode
  • Show More

What makes Insul-Guard a great solution

  • Insul-Guard Is a cost effective way to protect foundation insulation above grade. It can also be used for waterproofing foundations above grade or just be used for enhancing the plain, unattractive look of concrete. It is ideal for protecting ICF’s because of it’s strength and durability.
  • Insul-Guard is made up of a lightweight, durable 100% waterproof, mold & mildew resistant composite that can withstand extreme blunt force from backfills and every day use of lawn equipment.
  • Insul-Guard can be mechanically attached or you can use our commercial grade double-back tape. The tape has no harmful V.O.C. so it will not harm the foam. It can be applied to wet surfaces and –40° F temperatures so there are no delays because of inclement weather.
  • Insul-Guard can be cut with a shears/snips so no special tools are needed. It saves money and a ton of labor because it can be installed in 75% less time than spray on coatings. It is also approx. 100x stronger than spray on coatings.
Stacks Image 57244

Night and Day Difference

Competition
Cheap Plastic

Many of the old systems used cheap plastic which could not stand up to the rigors of a structures foundation. They could not hold up and:
- cracked
- buckled
- rippled
- oil canned

Insul-Guard
Space Age Composite

Insul-Guard has been designed and formulated with a composite material that has been proven to protect foundation insulation as well as provide a waterproofing system. The advantage of Insul-Guard is
- high impact resistance
- won’t buckled or oil can
- waterproof
- uv resistant

“They may look similar … but there is a Night and Day difference.”

Insul-Flash

“Adjustable Z-Flashing”

Stacks Image 760290
Stacks Image 760293
$44.99
Concrete Gray Color

Accommodates Variable Thickness of Insulation
Comes in Roll Form
Adhesive Peel & Stick Overlap

More Details..

Insul-Flash

Stacks Image 29328

Roll Size Availability
25’ Long
100’ Long

Pre-Grooved Adjustment
Insulation thickness 1” - 3”
(Larger sizes available)

Stacks Image 29332

Top of Insulation
Transition

Diverts Waterflow
Protection insulation
Prevents will plate leakage
Adjustable To 3” insulation
Pre-grooved for easy bending
Every 1/2” starting at 1” - 3”
Adjustable top for sloped or flat insulation

Peel & Stick Adhesive Down-Flap
Seal of top of Insul-Guard
Blocks air and moisture infiltration
Acts as a counter flashing

Insul-Shield Flashing

“Waterproofs the Top Edge”

Stacks Image 760343
Stacks Image 760346
$15.99
Concrete Gray Color

Protects Top Edge From Infiltration
Very Aggressive Bonding Adhesive
Peel & Stick

More Details..

Insul-Shield

Stacks Image 28517

Roll Size Availability
3” Wide x 75’ Long
6” Wide x 75’ Long

Stacks Image 29181

Air & Moisture Barrier Tape

Reduces Energy Costs
Stops air flow
Protect foam R-value
Blocks water flow
Cold or Wet Adhesion
No weather delays
Real world conditions
No VOCs
Super Strong
25 X stronger
Permanent Bond
Punctured Resistant